Accessories for IVAR.PROFI-AIR units
IVAR.PROFI-AIR heat recovery ventilation comes with a wide range of accessories: ePM1 70 % (F7 + G4) replacement filters and an enthalpy exchanger for SMARTY 2X units, the IVAR.STOUCH room control panel and the 1.2 kW EKA NIS electric air pre-heater. For installing the ductwork there are knives and shears for DN 63 to 90 ducts plus clips for fixing CLASSIC ducting.
Product sorting
List of products
In-duct air/water heat exchanger DN 125 for pre-heating or pre-cooling fresh...
In-duct air/water heat exchanger DN 160 for pre-heating or pre-cooling fresh...
Enthalpy exchanger for the SMARTY 2X P ventilation unit that recovers both heat...
Enthalpy exchanger for the SMARTY 2X V ventilation unit that recovers both heat...
Enthalpy exchanger for the SMARTY 3X P and 4X P ventilation units that recovers...
Enthalpy exchanger for the SMARTY 3X V and 4X V ventilation units that recovers...
Listing controls
indoor air quality (VOC) sensor / humidity sensor - IVAR.AIR FLAT VOC / IVAR.AIR FLAT VLM
- installation in the IVAR.PROFI-AIR FLAT, FLEX ventilation unit
connecting cable - IVAR.AIR FLEX K
- for IVAR.PROFI-AIR FLAT, FLEX
electronic pre-heater - IVAR.AIR FLEX O
- for IVAR.PROFI-AIR FLEX
enthalpy exchanger - IVAR.AIR FLEX ENT
- exchanger for heat and humidity recovery
- lower activation temperature for frost protection
- easy maintenance
replacement filter set - IVAR.AIR FLEX G4
- standard filter class
- design G4/G4
replacement filter set - IVAR.AIR FLEX G4F7
- set containing a more efficient F7 filter for finer filtration of outdoor air
- design G4/F7
floor mounting kit - IVAR.AIR FLEX MS
replacement filter - IVAR. AIR TOUCH F5, IVAR. AIR TOUCH F7, IVAR. AIR TOUCH G4
- design F5 and F7 for supply air
- filter F7 provides more efficient filtration of fine particles than filter F5
- design G4 for exhaust air
- material polyester fiber
connection kit - IVAR.AIR DS
- IVAR.AIR TOUCH DS - for connecting IVAR.PROFI-AIR TOUCH
- material steel
- IVAR.AIR TOUCH DSI - for connecting IVAR.PROFI-AIR 400 TOUCH
- material EPP
noise silencer - IVAR.AIR TL
- intermediate piece for the main ducting of the IVAR.PROFI-AIR system
- used to dampen noise transmitted through the ducting
- between the ventilation unit and the distributor
- material aluminum (double-wall flexible ducting), mineral wool + resin
duct cutter - IVAR.RER
- used for cutting IVAR.PROFI-AIR CLASSIC NA flexible circular ducting
clip - IVAR.CLIP
Frequently Asked Questions
- What types of accessories for IVAR.PROFI-AIR do you offer? Air quality (VOC) and humidity sensors, filters (conical and rectangular), noise silencers, connection kits for SMARTY units, knives and scissors for cutting ducting of various diameters.
- What is the VOC/VLM sensor used for? It measures indoor air quality (volatile organic compound content) or humidity, and automatically controls the ventilation intensity of the FLAT/FLEX unit based on the measured values.
- Why is a noise silencer included in the range? It reduces the transmission of fan noise and airflow noise from the SMARTY unit into living spaces via the ducting.
- Which knife should be used to cut flexible ducting? Knives are supplied in diameters according to the duct DN (e.g. DN 63, DN 75, DN 90) - choose according to the diameter of the IVAR.PROFI AIR ducting being installed.