Accessories for IVAR.PROFI-AIR units
IVAR.PROFI-AIR heat recovery ventilation comes with a wide range of accessories: ePM1 70 % (F7 + G4) replacement filters and an enthalpy exchanger for SMARTY 2X units, the IVAR.STOUCH room control panel and the 1.2 kW EKA NIS electric air pre-heater. For installing the ductwork there are knives and shears for DN 63 to 90 ducts plus clips for fixing CLASSIC ducting.
Product sorting
List of products
Pipe heat exchanger DN 160 for preheating or precooling of fresh outside air...
Pipe air-to-water heat exchanger DN 125 for preheating or precooling of fresh...
Electric duct air heater for 160 mm diameter ducts, rated 1.2 kW, for SMARTY...
Enthalpy exchanger for the SMARTY 2X P ventilation unit that recovers both heat...
Replacement filters for the SMARTY 2X P heat recovery ventilation unit designed...
Enthalpy exchanger for SMARTY 2X V ventilation unit that recovers heat and...
Enthalpy heat exchanger for SMARTY 3X P and 4X P ventilation units, which recovers...
Enthalpy heat exchanger for SMARTY 3X V and 4X V ventilation units, which during...
Wall-mounted control panel with touchscreen and Wi-Fi module for SMARTY 2X, 3X and...
Listing controls
indoor air quality (VOC) sensor / humidity sensor - IVAR.AIR FLAT VOC / IVAR.AIR FLAT VLM
- installation in the IVAR.PROFI-AIR FLAT, FLEX ventilation unit
connecting cable - IVAR.AIR FLEX K
- for IVAR.PROFI-AIR FLAT, FLEX
electronic pre-heater - IVAR.AIR FLEX O
- for IVAR.PROFI-AIR FLEX
enthalpy exchanger - IVAR.AIR FLEX ENT
- exchanger for heat and humidity recovery
- lower activation temperature for frost protection
- easy maintenance
replacement filter set - IVAR.AIR FLEX G4
- standard filter class
- design G4/G4
replacement filter set - IVAR.AIR FLEX G4F7
- set containing a more efficient F7 filter for finer filtration of outdoor air
- design G4/F7
floor mounting kit - IVAR.AIR FLEX MS
replacement filter - IVAR. AIR TOUCH F5, IVAR. AIR TOUCH F7, IVAR. AIR TOUCH G4
- design F5 and F7 for supply air
- filter F7 provides more efficient filtration of fine particles than filter F5
- design G4 for exhaust air
- material polyester fiber
connection kit - IVAR.AIR DS
- IVAR.AIR TOUCH DS - for connecting IVAR.PROFI-AIR TOUCH
- material steel
- IVAR.AIR TOUCH DSI - for connecting IVAR.PROFI-AIR 400 TOUCH
- material EPP
noise silencer - IVAR.AIR TL
- intermediate piece for the main ducting of the IVAR.PROFI-AIR system
- used to dampen noise transmitted through the ducting
- between the ventilation unit and the distributor
- material aluminum (double-wall flexible ducting), mineral wool + resin
duct cutter - IVAR.RER
- used for cutting IVAR.PROFI-AIR CLASSIC NA flexible circular ducting
clip - IVAR.CLIP
Frequently Asked Questions
- What types of accessories for IVAR.PROFI-AIR do you offer? Air quality (VOC) and humidity sensors, filters (conical and rectangular), noise silencers, connection kits for SMARTY units, knives and scissors for cutting ducting of various diameters.
- What is the VOC/VLM sensor used for? It measures indoor air quality (volatile organic compound content) or humidity, and automatically controls the ventilation intensity of the FLAT/FLEX unit based on the measured values.
- Why is a noise silencer included in the range? It reduces the transmission of fan noise and airflow noise from the SMARTY unit into living spaces via the ducting.
- Which knife should be used to cut flexible ducting? Knives are supplied in diameters according to the duct DN (e.g. DN 63, DN 75, DN 90) - choose according to the diameter of the IVAR.PROFI AIR ducting being installed.