High-performance axial fan IVAR.ASPIRANTE HT with humidistat and timer – for Ø 80/100/120 mm ducts, 230 V
Code: IVAP3104Product detailed description
The IVAR.ASPIRANTE HT fan (code IVAP3104) is designed for intermittent or continuous extraction of air from bathrooms, kitchens and utility rooms in flats, houses and commercial premises. It discharges the air directly outside through the wall or into a ventilation shaft and, with kit IVAP0900, can also be fitted in a window or glass pane.
Features
- connection to Ø 80, 100 or 120 mm ducts – three adapters and a backdraught shutter included
- airflow 55–130 m³/h depending on the duct diameter
- housing made of impact-resistant, UV-stable ABS plastic
- induction motor with thermal fuse, insulation class F, double insulated (class II)
- protection rating IPX4, max. air temperature 45 °C, power supply 230 V / 50 Hz
- the shortened spigot allows a duct bend to be connected right behind the fan
Humidistat and timer
The fan starts automatically when the relative humidity in the room exceeds the set threshold and runs until the humidity drops. The timer then keeps it running for a further 45 s to 20 min. The threshold can be set between 40 and 80% RH, and the fan can also be started manually.
Mount the fan on a wall or ceiling at least 2.3 m above the floor and connect it via a double-pole switch with a contact gap of at least 3 mm. It must not discharge into a duct that carries flue gases from a gas appliance. Electrical connection should be carried out by a qualified electrician.
Technical data
| Code | IVAP3104 |
| Brand | IVAR |
| Type | IVAR.ASPIRANTE HT |
| Product type | axial extract fan |
| Version | with humidistat and timer |
| Duct diameter | Ø 80 / 100 / 120 mm (adapters included) |
| Airflow | 55–130 m³/h depending on duct diameter |
| Power supply | 230 V / 50 Hz |
| Protection rating | IPX4 |
| Max. air temperature | 45 °C |
| Housing material | ABS, impact-resistant, UV-stable |
| Motor | induction motor with thermal fuse, insulation class F |
| Run-on time | 45 s – 20 min |
| Humidity setting | 40–80% RH |
Frequently asked questions
Which duct diameter does the fan fit?
Ducts of Ø 80, 100 or 120 mm. The matching adapters and the backdraught shutter are included; an adapter for Ø 90 mm can be ordered separately.
Can the fan be mounted in a window?
Yes, with the window or glass mounting kit (code IVAP0900), which fits all diameters. The glass may be no more than 15 mm thick.
When does the fan switch on by itself?
When the relative humidity in the room exceeds the value set within the range 40–80% RH. After the humidity has dropped, it keeps running for the set time of 45 s to 20 min.
How is the fan cleaned?
After disconnecting it from the mains, wash the dirty parts with water and a neutral detergent. Never immerse electrical components in water.
Additional parameters
| Category: | Forced ventilation with heat recovery |
|---|---|
| Warranty: | 2 years |
| Type: | ducts and fittings |
| Code: | IVAP3104 |
| Brand: | IVAR |
| Type: | IVAR.ASPIRANTE HT |
| Product type: | axial extract fan |
| Version: | with humidistat and timer |
| Duct diameter: | Ø 80 / 100 / 120 mm (adapters included) |
| Airflow: | 55–130 m³/h depending on duct diameter |
| Power supply: | 230 V / 50 Hz |
| Protection rating: | IPX4 |
| Max. air temperature: | 45 °C |
| Housing material: | ABS, impact-resistant, UV-stable |
| Motor: | induction motor with thermal fuse, insulation class F |
| Run-on time: | 45 s – 20 min |
| Humidity setting: | 40–80% RH |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.