BRA.ECO 3F, 3T - Backflow preventers
BRA.ECO type BA backflow preventers (disconnectors) protect the water supply against backflow of fluids up to category 4 to EN 1717, for example when filling a heating system. Type 3T connects with 1/2" to 2" threads, 3F with PN 10 flanges, and pre-assembled sets are available for smaller sizes. A strainer belongs upstream and the discharge goes to the drain.
Product sorting
1 items total
List of products
Action
–10 %
4 797 € excl. VAT
5 900,31 €
The BRA.ECO 3F DN 100 disconnector protects the drinking water network against...
Listing controls
1 items total
BACKFLOW PREVENTER - DISCONNECTOR
- BRA.ECO 3T - max. pressure 10 bar, threaded connection 1/2" - 2" according to ISO 228-1
-
BRA.ECO 3F - max. pressure 10 bar, PN 10 flanges according to EN 1092-1
- T = 0 °C to max. +65 °C
- according to EN 1717, protection unit type BA - for liquids up to fluid category 4
- material - body, cover: brass/bronze, membrane: EPDM
- a filter must always be installed upstream of the disconnector
- the disconnector must be connected to the sewage drain
Frequently asked questions
- What is the difference between the 3T and 3F versions? The ECO 3T is the threaded version (1/2" - 2" according to ISO 228-1), the ECO 3F is the flanged version (PN 10 according to EN 1092-1).
- What needs to be installed upstream of the preventer? A filter must always be installed upstream of the disconnector to protect the valves from contamination.
- Where does the escaping water go when the pressure drops? The disconnector must be connected to the sewage drain, since it releases part of the medium through the outlet when the pressure drops.
- Which standard is the device classified under? According to EN 1717 as a type BA protection unit, suitable for liquids up to contamination category 4.