Cleaning pump GEL.BOY C 30 MATIC, 24 l, 44 l/min, automatic flow switch + GEL.BOILER CLEANER L.Z. 10 kg – SPECIAL OFFER
Code: 121.075.00BCProduct detailed description
The set includes a cleaning pump GEL.BOY C 30 MATIC with a 24 l tank and 10 kg of concentrated preparation GEL.BOILER CLEANER L.Z.. It is used for removing deposits from heating and cooling systems, heat exchangers and pipes: the cleaning solution is left to circulate in the system until the deposits are dissolved.
Pump GEL.BOY C 30 MATIC
- flow rate up to 44 l/min, head pressure 15 m
- automatic flow direction switch: manual mode with button M, automatic mode with intervals of 1, 3, 5, 7 or 9 minutes, automatic shutdown after 2 hours
- vertical shaft with motor mounted on top – suitable for aggressive liquids
- transparent tank made of durable plastic
- power supply 230 V, protection class IP 54, maximum solution temperature 50 °C
- dimensions 40 x 63 cm, weight 10.5 kg, connection 1/2"
Why switch the flow direction
Changing the flow direction allows the solution to act on deposits from both sides and breaks up particles that are released during dissolution. The cleaning is faster and can handle almost clogged pipes or heat exchangers. It removes lime scale, calcium and silicate deposits, iron and manganese oxides, iron bacteria, as well as organic deposits and algae.
Preparation GEL.BOILER CLEANER L.Z.
Concentrated cleaning liquid with a special zinc inhibitor, which according to the manufacturer does not damage system materials and does not emit fumes. It is suitable for systems with copper, cast iron, steel, stainless steel, aluminum, brass, tin, light alloys and galvanized surfaces. The preparation is corrosive, so when working with it, use protective gloves and goggles according to the safety data sheet.
Working with the pump
During cleaning, keep the tank lid open to allow gases to escape. After finishing, pour out the solution from the tank and rinse the pump with clean water for at least 10 minutes – never leave the solution in the tank. When moving the pump, lift it, do not drag it along the ground.
Technical specifications
| Code | 121.075.00BC |
| Manufacturer | IVAR |
| Type | GEL.BOY C 30 MATIC + BC |
| Tank volume | 24 l |
| Max. flow rate | 44 l/min |
| Head pressure | 15 m |
| Flow switch | automatic (modes M and A) |
| Power supply | 230 V |
| Protection class | IP 54 |
| Max. solution temperature | 50 °C |
| Dimensions | 40 x 63 cm |
| Set contents | pump + GEL.BOILER CLEANER L.Z. 10 kg |
Frequently asked questions
What is included in the set?
Cleaning pump GEL.BOY C 30 MATIC with a 24 l tank and 10 kg of concentrated cleaning preparation GEL.BOILER CLEANER L.Z.
For which system materials is the preparation suitable?
GEL.BOILER CLEANER L.Z. is suitable for systems with copper, cast iron, steel, stainless steel, aluminum, brass, tin, light alloys and galvanized surfaces. It contains a special zinc inhibitor.
How do I know the cleaning is finished?
When no more bubbles form in the return pipe and the solution remains acidic. Then pour out the solution and rinse the pump with clean water for at least 10 minutes.
How does the automatic flow switching work?
After pressing button A, use button SET to select an interval of 1, 3, 5, 7 or 9 minutes after which the pump will change the flow direction. After two hours of operation, the pump will shut off automatically.
Additional parameters
| Category: | cleaning pumps |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | 121.075.00BC |
| Manufacturer: | IVAR |
| Type: | GEL.BOY C 30 MATIC + BC |
| Tank volume: | 24 l |
| Max. flow rate: | 44 l/min |
| Head: | 15 m |
| Flow reverser: | automatic (modes M and A) |
| Power supply: | 230 V |
| Protection rating: | IP 54 |
| Max. solution temperature: | 50 °C |
| Dimensions: | 40 x 63 cm |
| Set contents: | pump + GEL.BOILER CLEANER L.Z. 10 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.