Cleaning pump GEL.LONG LIFE SUPER FLUSH 40 – 40 l, 102 l/min, hydraulic flow direction switch
Code: 121.094.00Product detailed description
GEL.LONG LIFE SUPER FLUSH 40 (code 121.094.00) is a vertical axial pump with a 40-litre tank designed for flushing and removing deposits from heating and cooling systems. It is suitable for floor heating, radiators, heat exchangers, cooling circuits and solar systems.
Main features
- flow rate 102 l/min, head pressure 18 m, motor 0.75 HP
- flow direction switch – the solution circulates clockwise and counterclockwise
- two three-way valves, connection to water supply, waste and safety drain
- connection 1" F, power supply 230 V / 50 Hz, protection class IP 54
- wheels for easier transport, weight 19 kg
What it can remove
Scale, calcium and magnesium deposits, iron and manganese oxides, bacteria including iron bacteria and organic substances, coatings and algae. The manufacturer recommends cleaning agents from the BOILER CLEANER and LONG LIFE ranges; residual acidity after cleaning is neutralised with the BOILER CLEANER N preparation.
Flushing procedure
- first flush with clean water for at least 2 minutes, then change direction
- chemical flushing with water supply and waste closed, change direction every 5–10 minutes; cleaning usually takes 2–3 hours
- final flush with clean water until impurities stop coming out of the system
- the pump can also be used to fill the system with a corrosion inhibitor or antifreeze mixture
The solution temperature must not exceed 50 °C. Citric, acetic, hydrochloric, formic, phosphoric, amino-sulphonic and sodium hydroxide can be used only up to concentrations specified in the technical sheet; sulfuric, nitric, hydrofluoric acid or aqua regia must not be used.
Technical parameters
| Code | 121.094.00 |
| Manufacturer | IVAR |
| Type | GEL.LONG LIFE SUPER FLUSH 40 |
| Tank volume | 40 l |
| Flow rate | 102 l/min |
| Head pressure | 18 m |
| Flow direction switch | hydraulic |
| Motor | 0.75 HP |
| Power supply | 230 V / 50 Hz |
| Protection class | IP 54 |
| Water and ambient temperature | 5 – 50 °C |
| Connection | 1" F |
| Dimensions (w x h x d) | 40 x 95 x 70 cm |
| Weight | 19 kg |
Frequently asked questions
What is the SUPER FLUSH 40 pump used for?
For flushing and removing deposits from floor heating, radiators, heat exchangers, cooling circuits and solar systems.
How long does it take to clean a system?
It depends on the degree of contamination; chemical flushing usually takes 2 to 3 hours. The flow direction is changed every 5 to 10 minutes.
Which chemicals must not be used in the pump?
Sulfuric, nitric, hydrofluoric acid and aqua regia. Other acids and sodium hydroxide are allowed only up to the concentrations specified in the technical sheet.
Can I use the pump to fill the system with an inhibitor or antifreeze mixture?
Yes. With water supply and waste closed, pour the preparation into the tank and let the pump run for a few minutes.
Additional parameters
| Category: | cleaning pumps |
|---|---|
| Warranty: | 2 years |
| Weight: | 19 kg |
| Availability: | In stock or at supplier |
| Code: | 121.094.00 |
| Manufacturer: | IVAR |
| Type: | GEL.LONG LIFE SUPER FLUSH 40 |
| Tank volume: | 40 l |
| Flow rate: | 102 l/min |
| Head: | 18 m |
| Flow reverser: | hydraulic |
| Motor: | 0.75 HP |
| Power supply: | 230 V / 50 Hz |
| Protection rating: | IP 54 |
| Water and ambient temperature: | 5 – 50 °C |
| Connection: | 1" F |
| Dimensions (w x h x d): | 40 x 95 x 70 cm |
| Weight: | 19 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.