Column filter with activated carbon IVAR.DECLO 320-5 – chlorine and organic compounds removal, connection 6/4"
Code: IVA.332.DC5Product detailed description
IVAR.DECLO 320-5 is a column filter with activated carbon media that captures chlorine compounds, total organic carbon (TOC), pesticides, herbicides and other organic substances from water. It is used for the treatment of drinking, utility and process water.
Size 320
- dimensions w × h × d: 522 × 522 × 1912 mm
- inlet/outlet connection: 6/4", waste: 1" external thread
- operational flow rate approximately 19.2 m³/h – the actual value depends on water contamination and the design of the treatment plant
- max. operating pressure 6 bar, temperature of treated water 5 – 35 °C
Control and regeneration
The electronic unit WSCI with five buttons (SET CLOCK, NEXT, REGEN and two arrows) initiates regeneration according to time or according to the volume passed. The media is regenerated using only backwash water; no additional substances are added to the water. For regular backwashing, a pressure of at least 3 bar and a flow rate of 3.6 m³/h for approximately 20 – 30 minutes is required.
Installation
The filter should be installed in a dry room with an ambient temperature of 5 – 40 °C on a flat floor, leaving at least 200 mm of free space above it. It requires a waste line with sufficient capacity and a 230 V socket. The set includes shut-off valves, pressure gauges and sampling valves on the inlet and outlet, a closable bypass and a mechanical impurities filter before and after the filter. Before starting operation, the filter is rinsed with the outlet closed to prevent loose particles from entering the distribution system. It can be mounted by an installer, but commissioning must be carried out by an authorized company. The device meets the requirements for permanent contact with drinking water.
Technical specifications
| Code | IVA.332.DC5 |
| Brand | IVAR |
| Type | IVAR.DECLO 320-5 |
| Media | activated carbon |
| Application | removal of chlorine, TOC, pesticides and organic substances |
| Control unit | WSCI (5 buttons), according to time or volume |
| Inlet/outlet connection | 6/4" |
| Waste connection | 1" external thread |
| Operational flow rate | 19.2 m³/h (approximately) |
| Dimensions w × h × d | 522 × 522 × 1912 mm |
| Max. operating pressure | 6 bar |
| Water temperature | 5 – 35 °C |
| Power supply | 230 V |
Frequently asked questions
What does the IVAR.DECLO filter remove from water?
The activated carbon media captures chlorine compounds, total organic carbon (TOC), pesticides, herbicides and other organic substances. It is suitable for drinking and process water.
Are any chemicals added to the water during regeneration?
No. The media is regenerated using only backwash water, which is why the filter requires a permanent connection to the waste line and a pressure of at least 3 bar.
What do I need to prepare before installation?
A waste line with sufficient capacity, a 230 V socket within reach of the cable, shut-off valves with pressure gauges and sampling valves, a bypass and a mechanical impurities filter before and after the filter. Size 320 has dimensions of 522 × 522 × 1912 mm and at least 200 mm of space must be left above it.
Can I commission the filter myself?
The filter can be mounted by an installer and the pre-start rinse is carried out by the customer. Commissioning and setting must be done by an authorized company, otherwise the right to warranty repairs is lost.
Additional parameters
| Category: | column filters |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | IVA.332.DC5 |
| Brand: | IVAR |
| Type: | IVAR.DECLO 320-5 |
| Filter bed: | activated carbon |
| Application: | removal of chlorine, TOC, pesticides and organic substances |
| Control unit: | WSCI (5 buttons), by time or volume |
| Inlet/outlet connection: | 6/4" |
| Drain connection: | 1" male thread |
| Operating flow: | 19.2 m³/h (indicative) |
| Dimensions W × D × H: | 522 × 522 × 1912 mm |
| Max. operating pressure: | 6 bar |
| Water temperature: | 5 – 35 °C |
| Power supply: | 230 V |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.