FEKA 1400 - 1800
- Asynchronous submersible motor for continuous operation
- Standard winding thermal protection, brought out via a multi-core conductor
- The pumps must be fitted with a control and protection system supplied separately
- Protection rating: IP68
- Insulation class: F
- Manufactured to CEI 2-3 standard
- Max. immersion depth: 10 m
- Liquid temperature range: 0 °C to +55 °C
- Pumped liquid: sewage and raw water containing particles or long fibres, non-aggressive
- Operating range from 3 to
FEKA 2000
Robust sewage pump with a vortex impeller
- Asynchronous submersible motor for continuous operation, two- or four-pole
- Winding thermal protection must be connected to the control and protection system
- Electrical protection rating: IP68
- Insulation class: F
- Manufactured to CEI 2-3 standard
- Standard voltage: three-phase 400 V/50 Hz
- Liquid temperature range: 0 °C to +55 °C
- Electric cable: 10 m neoprene, H07 RN-F
- Max. immersion depth: 20 m
- Installation: fixed or portable, in a vertical position
- Operating range: from 3 to 39 m3/h with head up to 17 m
FEKA 2500/2700
Cast-iron submersible pumps with a vortex impeller, suitable for pumping waste water containing solid particles up to a maximum
diameter of 62 mm. Motor body, hydraulic section and impeller made of EN GJL 200 cast iron.
Silicon carbide/silicon carbide mechanical seal in an oil chamber. Dry, enclosed asynchronous motor. Single-phase versions can be
fitted with a float switch.
* For single-phase versions: the capacitor and overcurrent protection are located in an external control unit supplied with a Schuko plug. For three-phase versions: thermal and overcurrent protection is the responsibility of the user.
- Protection rating: IP68
- Insulation class: F
- Continuous operation possible when the pump is fully submerged. Supplied as standard with a 10 m H07RN-F cable
- Operating range: from 6 to 48 m3/h with head up to 17 m
- Pumped liquid: non-aggressive waste water
- Liquid temperature range: 0 °C to +40 °C
- Max. immersion depth: 20 m
- Installation: portable, in a vertical position
- Free passage: 62 mm
- Supplied with a UNI 1.092 PN 6 flange
- A lifting device is available: see accessories
FEKA 6000/6100/6200/6300/8100/8200/8300
Cast-iron submersible pumps with a vortex impeller for pumping waste water containing solid particles with a diameter of 80-108 mm. Single-channel impeller (6000 version) and three-channel impeller (8000 version). Motor body, hydraulic section and impeller made of EN GJL 200 cast iron. Silicon carbide / silicon carbide mechanical seal in an oil chamber. Dry, enclosed asynchronous motor. Thermal and overcurrent protection is installed in the motor winding.
- Protection rating: IP68
- Insulation class: F
- Continuous operation possible when the pump is fully submerged. Supplied as standard with a 10 m H07RN-F power cable
- Free passage: 80-108 mm
- Operating range: from 36 to 780 m3/h with head up to 28 m
- Pumped liquid: non-aggressive waste water
- Free passage: 80 - 108 mm
- Liquid temperature range: 0 °C to +40 °C
- Max. immersion depth: 20 m
- Installation: vertical position
