DAB.FEKA VS 750 M-A submersible sewage pump, all stainless steel, 1×230 V with float switch, solids up to 50 mm – SALE
Code: 60219348HProduct detailed description
The DAB.FEKA VS 750 M-A (code 60219348H) is a submersible sewage pump whose pump body, motor casing and terminal box cover with handle are made of AISI 304 stainless steel. The precision-cast stainless steel vortex impeller passes solids up to 50 mm in diameter, so the pump handles non-aggressive wastewater and sewage. The maximum head is 9.6 m and the maximum flow 24 m³/h.
M-A version
The single-phase 1×230 V motor has a permanently connected capacitor and built-in thermal sensors that protect the winding against overheating. The float switch controls the pump automatically according to the level, and the 10 m H07RN-F power cable ends in a Schuko plug.
Design
- dry two-pole asynchronous motor, hermetically sealed and cooled by immersion in the pumped liquid
- double mechanical seal with non-toxic oil filling – silicon carbide on the pump side, carbon/ceramic on the motor side
- shaft running in grease-for-life ball bearings for quiet operation
- IP68 protection, insulation class F, handle covered with insulating rubber
- radial outlet with 2" female thread, suitable for the DSD2 lifting device
The pump can be installed permanently or used portably in a vertical position. The liquid temperature may be 0 to +35 °C for domestic use and up to +50 °C for other uses; with a partially submerged motor the ambient temperature must not exceed +40 °C. The electrical connection must be made by a qualified person.
Technical data
| Code | 60219348H |
| Manufacturer | DAB |
| Type | DAB.FEKA VS 750 M-A |
| Power supply | 1×230 V, 50 Hz |
| Float switch | yes, automatic operation |
| Max. head | 9.6 m |
| Max. flow | 24 m³/h |
| Rated power P2 | 0.75 kW (1 HP) |
| Free passage | solids up to 50 mm |
| Outlet connection | 2" female thread |
| Material | AISI 304 stainless steel |
| Protection / insulation | IP68 / F |
| Power cable | 10 m H07RN-F with Schuko plug |
| Liquid temperature | 0 to +50 °C (domestic up to +35 °C) |
Frequently asked questions
How large solids can the pump pass?
The vortex impeller passes solids up to 50 mm in diameter. The pump is intended for non-aggressive wastewater and sewage.
Does the pump need a control panel?
No, the M-A version has a float switch and built-in motor thermal protection, so it works automatically according to the level. It is connected with its Schuko plug to a socket protected by a residual current device.
Which tank can I install the pump in?
For the FEKA VS 750 in M-A version, the DAB FEKABOX 110 and FEKABOX 200 sewage tanks are intended; both are prepared for pumps with a float switch.
Additional parameters
| Category: | DAB.FEKA - submersible sewage pumps |
|---|---|
| Warranty: | 2 years |
| Voltage: | 230 V |
| Version: | dirty water |
| Maximum flow rate: | 201 – 500 l/min |
| Code: | 60219348H |
| Manufacturer: | DAB |
| Type: | DAB.FEKA VS 750 M-A |
| Power supply: | 1×230 V, 50 Hz |
| Float switch: | yes, automatic operation |
| Max. head: | 9.6 m |
| Max. flow: | 24 m³/h |
| Rated power P2: | 0.75 kW (1 HP) |
| Free passage: | solids up to 50 mm |
| Outlet connection: | 2" female thread |
| Material: | AISI 304 stainless steel |
| Protection / insulation: | IP68 / F |
| Power cable: | 10 m H07RN-F with Schuko plug |
| Liquid temperature: | 0 to +50 °C (domestic up to +35 °C) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
