FEKA 1400 - 1800

•  Asynchronous submersible motor for continuous operation
• Standard winding thermal protection, brought out via a multi-core conductor
• The pumps must be fitted with a control and protection system supplied separately
• Protection rating: IP68
• Insulation class: F
• Manufactured to CEI 2-3 standard
• Max. immersion depth: 10 m
• Liquid temperature range: 0 °C to +55 °C
• Pumped liquid: sewage and raw water containing particles or long fibres, non-aggressive
• Operating range from 3 to

FEKA 2000

Robust sewage pump with a vortex impeller

• Asynchronous submersible motor for continuous operation, two- or four-pole
• Winding thermal protection must be connected to the control and protection system
• Electrical protection rating: IP68
• Insulation class: F
• Manufactured to CEI 2-3 standard
• Standard voltage: three-phase 400 V/50 Hz
• Liquid temperature range: 0 °C to +55 °C
• Electric cable: 10 m neoprene, H07 RN-F
• Max. immersion depth: 20 m
• Installation: fixed or portable, in a vertical position
• Operating range: from 3 to 39 m3/h with head up to 17 m

FEKA 2500/2700

Cast-iron submersible pumps with a vortex impeller, suitable for pumping waste water containing solid particles up to a maximum
diameter of 62 mm. Motor body, hydraulic section and impeller made of EN GJL 200 cast iron.
Silicon carbide/silicon carbide mechanical seal in an oil chamber. Dry, enclosed asynchronous motor. Single-phase versions can be
fitted with a float switch.
* For single-phase versions: the capacitor and overcurrent protection are located in an external control unit supplied with a Schuko plug. For three-phase versions: thermal and overcurrent protection is the responsibility of the user.

• Protection rating: IP68
• Insulation class: F
• Continuous operation possible when the pump is fully submerged. Supplied as standard with a 10 m H07RN-F cable
• Operating range: from 6 to 48 m3/h with head up to 17 m
• Pumped liquid: non-aggressive waste water
• Liquid temperature range: 0 °C to +40 °C
• Max. immersion depth: 20 m
• Installation: portable, in a vertical position
• Free passage: 62 mm
• Supplied with a UNI 1.092 PN 6 flange
• A lifting device is available: see accessories

FEKA 6000/6100/6200/6300/8100/8200/8300

Cast-iron submersible pumps with a vortex impeller for pumping waste water containing solid particles with a diameter of 80-108 mm. Single-channel impeller (6000 version) and three-channel impeller (8000 version). Motor body, hydraulic section and impeller made of EN GJL 200 cast iron. Silicon carbide / silicon carbide mechanical seal in an oil chamber. Dry, enclosed asynchronous motor. Thermal and overcurrent protection is installed in the motor winding.

• Protection rating: IP68
• Insulation class: F
• Continuous operation possible when the pump is fully submerged. Supplied as standard with a 10 m H07RN-F power cable
• Free passage: 80-108 mm
• Operating range: from 36 to 780 m3/h with head up to 28 m
• Pumped liquid: non-aggressive waste water
• Free passage: 80 - 108 mm
• Liquid temperature range: 0 °C to +40 °C
• Max. immersion depth: 20 m
• Installation: vertical position