Decentralised ventilation unit with heat pump IVAR.ASPIRCOMFORT PRO X 380V – 380 m³/h, DN 160, vertical
Code: IVAP20069Product detailed description
The IVAR.ASPIRCOMFORT PRO X 380V (code IVAP20069) is a compact monobloc unit for controlled ventilation of individual rooms in residential buildings, schools, clinics or offices. It is mounted vertically on the wall or stood on the floor and connects to the outside through two openings of 160 mm diameter (162 mm core drilling), so neither an outdoor unit nor ductwork through the building is needed.
Thermodynamic heat recovery
- refrigerant circuit with inverter BLDC compressor and electronic expansion valve that actively recovers energy from the extract air
- supply air is delivered at a temperature close to room temperature or even more favourable
- heating, cooling, dehumidification only, ventilation only, night and automatic eco modes
- counterflow plate heat exchanger, refrigerant R410A
Filtration and air quality
- ePM1 filters on supply and extract air, coarse pre-filter on outdoor air
- the air quality sensor (VOC) increases the airflow when air quality deteriorates
- optional UVC lamp IVAR.UVC-PRO X (code IVAP20384) to disinfect the supply air
Control and connection
- touch display on the unit and remote control included, 5 fan speeds including Dual Power, 1–24 h timer
- power supply 230 V / 50 Hz, max. current 5.0 A, power cable with plug
- CP contact for remote on/off (e.g. via a window contact)
- outdoor grilles with self-closing flaps included
It may only be installed indoors (protection rating IPX0) at an ambient temperature of 0 to 45 °C, not in bathrooms or toilets. The unit requires a condensate drain with a trap. Installation and initial commissioning must be carried out by a qualified technician.
Technical data
| Code | IVAP20069 |
| Brand | IVAR |
| Type | IVAR.ASPIRCOMFORT PRO X 380V |
| Version | ventilation unit with heat pump and thermodynamic heat recovery |
| Mounting | vertical, on wall or floor |
| Airflow | up to 380 m³/h |
| Air connection | DN 160 (Ø 162 mm) |
| Functions | ventilation, heating, cooling, dehumidification |
| Refrigerant | R410A |
| Filtration | ePM1 on supply and extract, pre-filter |
| Control | touch display, remote control |
| Power supply | 230 V / 1 ph / 50 Hz |
| Max. current | 5.0 A |
| Ambient temperature at installation | 0 to 45 °C |
| Accessory | UVC lamp IVAR.UVC-PRO X (IVAP20384) |
Frequently asked questions
Does the unit need an outdoor unit?
No. The refrigerant circuit with compressor is entirely inside the unit, which connects to the outside only through two openings of 160 mm diameter.
How long can the wall penetrations be?
No more than 1 m and without bends. The holes are drilled according to the supplied template with a slight downward slope to the outside so that no water runs into the unit.
Is the UVC lamp included?
No. The UVC lamp IVAR.UVC-PRO X (code IVAP20384) is ordered as an accessory and acts on the supply air delivered to the room.
Additional parameters
| Category: | Decentralized ventilation units and accessories |
|---|---|
| Warranty: | 2 years |
| Code: | IVAP20069 |
| Brand: | IVAR |
| Type: | IVAR.ASPIRCOMFORT PRO X 380V |
| Version: | ventilation unit with heat pump and thermodynamic heat recovery |
| Mounting: | vertical, on wall or floor |
| Airflow: | up to 380 m³/h |
| Air connection: | DN 160 (Ø 162 mm) |
| Functions: | ventilation, heating, cooling, dehumidification |
| Refrigerant: | R410A |
| Filtration: | ePM1 on supply and extract, pre-filter |
| Control: | touch display, remote control |
| Power supply: | 230 V / 1 ph / 50 Hz |
| Max. current: | 5.0 A |
| Ambient temperature at installation: | 0 to 45 °C |
| Accessory: | UVC lamp IVAR.UVC-PRO X (IVAP20384) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.