Duplex softening filter for water hardness treatment IVAR.DEVAP TWIN 030

Code: IVA.803.DV-DUPLEX
Not rated Rating details
2 671,56 € / pcs 2 172 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

The IVAR.DEVAP TWIN 030 softener has two columns, so it supplies softened water without interruption, even during regeneration. It is meant for drinking water; according to the manufacturer it can also be used for heating and process water. The WSTWIN electronic unit controls it by volume, and salt goes into a separate tank with a brine line. Code IVA.803.DV-DUPLEX is size 030.

Technical data

  • Dimensions (W × D × H): 690 × 230 × 1315 mm
  • Salt tank dimensions: 382 × 382 × 880 mm
  • Hydraulic connection (inlet/outlet): 1″
  • Indicative operating flow: 1.8 m³/h
  • Cyclic capacity: 2 × 160 m³·°f
  • Max. operating pressure: 6 bar
  • Treated water temperature: 5–35 °C
  • Power supply: 230 V
  • Drain connection: 3/4″, male thread
  • Control unit: WSTWIN

To set the outlet hardness fully, the manufacturer recommends an IVAR.TOP BALL ball valve on the bypass. A drain of sufficient capacity and a 230 V supply are needed; softener salt is added for regeneration. Have the installation and commissioning carried out by a qualified contractor.

Technical data

CodeIVA.803.DV-DUPLEX
ManufacturerIVAR
TypeIVAR.DEVAP TWIN 030
Dimensions (W × D × H)690 × 230 × 1315 mm
Salt tank dimensions382 × 382 × 880 mm
Hydraulic connection (inlet/outlet)1″
Indicative operating flow1.8 m³/h
Cyclic capacity2 × 160 m³·°f
Max. operating pressure6 bar
Treated water temperature5–35 °C
Power supply230 V
Drain connection3/4″, male thread
Control unitWSTWIN

Frequently asked questions

Why does the softener have two columns?
While one column softens, the other regenerates, so the unit supplies softened water without a technological pause.

What are the flow and capacity for code IVA.803.DV-DUPLEX?
The indicative operating flow is 1.8 m³/h and the cyclic capacity is 2 × 160 m³·°f. The values are indicative; the technical design decides.

Additional parameters

Category: softening filters
Warranty: 2 years
Code: IVA.803.DV-DUPLEX
Manufacturer: IVAR
Type: IVAR.DEVAP TWIN 030
Dimensions (W × D × H): 690 × 230 × 1315 mm
Salt tank dimensions: 382 × 382 × 880 mm
Hydraulic connection (inlet/outlet): 1″
Indicative operating flow: 1.8 m³/h
Cyclic capacity: 2 × 160 m³·°f
Max. operating pressure: 6 bar
Treated water temperature: 5–35 °C
Power supply: 230 V
Drain connection: 3/4″, male thread
Control unit: WSTWIN

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.