Ermetiq cartridge filter for water 10", 1", two-stage

Product detailed description

The two-stage cartridge filter Ermetiq with a 10" body and 1" connection captures impurities from the water before they reach other parts of the distribution system. It protects valves, appliances, and plumbing or heating systems from sediment, sand, and other impurities. Two filtration stages are combined in one body, and the packaging includes both inserts: a washable 50 µm and a carbon 5 µm insert.

Main Features

• Two-stage filtration in one body
• Washable 50 µm insert and carbon 5 µm insert included in the packaging
• Body size 10" and connection 1"
• Maximum working pressure 10 bar
• Operating temperature 5–45 °C
• Mounting bracket and key included in the packaging

Technical Data

Application

The filter should be installed at the water inlet to the household distribution system, where it mechanically cleans the incoming water. It protects batteries, valves, boilers, and other appliances from sediment and impurities. The two-stage design is suitable for places where you want to capture both coarse and fine particles, as the inserts have different fineness – 50 µm and 5 µm.

Installation and Maintenance

• The included mounting bracket is used for securing the filter; the packaging also includes a key.
• The 1" connection must match the pipe, or use an appropriate reducer if necessary.
• It is practical to install shut-off valves before and after the filter to allow for servicing without draining the entire installation.
• Do not exceed the maximum working pressure of 10 bar or the temperature range of 5–45 °C.
• The washable 50 µm insert can be rinsed after clogging; other inserts need to be replaced when clogged.

Frequently Asked Questions

What is included in the filter packaging?

Mounting bracket, key, washable 50 µm insert, and carbon 5 µm insert.

At what pressure and temperature can the filter be used?

The maximum working pressure is 10 bar and the operating temperature is 5–45 °C.

What is the size of the filter connection?

The connection size is 1", and the filter body size is 10".