FEKA FXV 20.07 T-NA submersible sewagee pump

Product detailed description

FEKA FXV 20.07 T-NA submersible sewage pump

Submersible sewage pumps for pumping waste water in commercial buildings. Pumps are certified according to the waste water standard EN 12050-1. Suitable for fixed installations with lifting equipment or portable, provided the pump is placed directly on the bottom of the tank. High-performance super vortex impeller with free passage. Double mechanical seal made of silicon carbide in an oil chamber, which is not in contact with the pumped liquid. Motor shaft made of stainless steel AISI 304, cable gland potting compound. Reduced overall dimensions and discharge connection available as flanged or threaded. Pumps are designed for quick maintenance thanks to the construction solution that provides easy access to the main pump components. Single-phase versions with an integrated capacitor, available with a float for automatic operation (MA) with power up to 1.5 kW. For three-phase versions, protection is the responsibility of the user. ATEX version is available for use in explosive environments. (Certification ATES: II2G Ex db IIB T4 GB of IEC EX: Ex db IIB T4 Gb)

• Operating range: flow rate up to 59.7 m³/h with a head up to 18.5 m
• Pumped liquid: with fibers, paper or textile material in domestic or commercial environments
• Passability: solid particles up to 50 mm or 65 mm depending on the model
• Liquid temperature range: up to +50 °C (+60 °C for short periods) + 40 °C for ATEX version
• Connection flanged and threaded: 2”, DN 50, DN 65
• Type of impeller: Vortex
• Degree of protection: IP 68
• Motor insulation class: F
• Maximum dry running time: 10 min
• Possible installation type: portable, fixed with coupling
• Special version on request: various cable lengths, voltage and frequency

Frequently asked questions

• How to choose the right pump power/head? It must cover the pressure losses in your specific circuit (pipe length, number of fittings) - if in doubt, consult a heating engineer who will accurately size the pump for you.
• Must the installation be carried out by a professional? Mounting the pump into a prepared pipe can be done by a DIY enthusiast, but electrical connection and system adjustment are recommended to be checked by a professional.