Filter 9 3/4" IVAR.FP3.TRIPLEX – 1" F, with inserts including granulated activated charcoal – SPECIAL OFFER
Code: IVAA1131025GACProduct detailed description
IVAR.FP3.TRIPLEX (code IVAA1131025GAC) is a three-stage filter of size 9 3/4", in which water passes through three successive filtration stages. It captures mechanical impurities such as sand, rust particles or fine corrosion particles, and is also suitable for final fine filtration of rainwater. This version is supplied with inserts including a stage with granulated activated carbon.
Inserts included in the package
- RL-A – 80 µm
- GAC40 – 40 µm, granulated activated carbon
- FR-N – 20 µm, PP melt-blown
Technical data
- inlet/outlet connection 1" F, max. operating flow 3.6 m³/h
- pressure class PN 10, water temperature +5 to +40 °C
- dimensions 396 × 365 × 145 mm, body made of SAN, head made of PP
Installation and maintenance
- installation should be carried out by a qualified installer; if the network pressure exceeds 8 bar, a pressure reducing valve is required
- in a system without an expansion tank, a balancing pressure tank with a capacity of at least 2 l must be installed before the filter
- we recommend a pressure gauge before and after the filter – if the pressure difference exceeds 0.5 bar, clean or replace the insert
- follow the flow direction indicated by the arrow, secure the filter and protect it from frost and direct sunlight
To replace the insert, first insert it into the housing, then mount the housing onto the head and tighten it by hand using the compression nut. A key IVAAVAFP3 is used to loosen the nuts. Suitable replacement inserts include FR-N, F-A, RLA, AC-HT, GAC40 and CTO-E. The variant IVAA1131025K is supplied with inserts of 250, 80 and 20 µm.
Technical parameters
| Code | IVAA1131025GAC |
| Manufacturer | IVAR |
| Type | IVAR.FP3.TRIPLEX |
| Type | three-stage mechanical impurities filter |
| Size | 9 3/4" |
| Connection | 1" F |
| Max. operating flow | 3.6 m³/h |
| Pressure class | PN 10 |
| Water temperature | +5 to +40 °C |
| Dimensions | 396 × 365 × 145 mm |
| Material | body SAN, head PP |
| Inserts in the package | RL-A 80 µm, GAC40 40 µm, FR-N 20 µm |
Frequently asked questions
Which inserts are included in the filter?
The filter is supplied with three inserts: RL-A with a porosity of 80 µm, GAC40 with granulated activated carbon (40 µm), and FR-N made of PP melt-blown with a porosity of 20 µm.
When should the inserts be cleaned or replaced?
We recommend installing a pressure gauge before and after the filter. If the pressure difference exceeds 0.5 bar, the insert should be cleaned or replaced.
What should be ensured during installation?
If the network pressure exceeds 8 bar, install a pressure reducing valve before the filter. If there is no expansion tank in the system, install a balancing pressure tank with a capacity of at least 2 l before the filter.
Which other inserts can be used?
Inserts of types FR-N, F-A, RLA, AC-HT, GAC40 and CTO-E can be used in the filter. A mounting key IVAAVAFP3 is used to loosen the nuts.
Additional parameters
| Category: | filters for drinking water |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | IVAA1131025GAC |
| Manufacturer: | IVAR |
| Type: | IVAR.FP3.TRIPLEX |
| Product: | three-piece mechanical impurity filter |
| Size: | 9 3/4" |
| Connection: | 1" F |
| Max. operating flow: | 3.6 m³/h |
| Pressure rating: | PN 10 |
| Water temperature: | +5 to +40 °C |
| Dimensions: | 396 × 365 × 145 mm |
| Material: | SAN body, PP head |
| Cartridges supplied: | RL-A 80 µm, GAC40 40 µm, FR-N 20 µm |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.