Filter Insert IVAR.BIG BLUE 4.5 × 10" – 10 µm, Activated Carbon Block – SPECIAL OFFER
Code: ESCHVCB4510ECOProduct detailed description
The insert ESCHVCB4510ECO is a replacement filter element for the IVAR.BIG BLUE filter ESFPV4510ECO with dimensions 4.5 × 10" and 1" F connection. It consists of a block of compressed activated carbon with a porosity of 10 µm. Activated carbon is used in the IVAR.BIG BLUE range when, in addition to fine impurities, it is also necessary to improve the taste and odor of the water.
- dimensions 4.5 × 10", porosity 10 µm
- material: block of compressed activated carbon
- for cold water with a temperature of +5 to +40 °C
The lifespan of the insert depends on the quality of the incoming water and the frequency of use – it is usually replaced after 2 to 6 months, or according to the water meter. The manufacturer recommends using only original inserts; using inserts from other manufacturers voids the warranty on the filter. When replacing, close the water supply, release the pressure with the tap behind the filter, unscrew the housing with a key, clean it, and before tightening, check the O-ring.
Technical parameters
| Code | ESCHVCB4510ECO |
| Manufacturer | IVAR |
| Type | IVAR.BIG BLUE |
| Type | filter insert |
| Dimensions | 4.5 × 10" |
| Porosity | 10 µm |
| Material | block of compressed activated carbon |
| Application | filter IVAR.BIG BLUE ESFPV4510ECO (1" F) |
| Water temperature | +5 to +40 °C |
| Replacement interval | usually 2–6 months |
Frequently asked questions
Which filter does the insert fit into?
Into the IVAR.BIG BLUE 4.5 × 10" filter with a 1" F connection, code ESFPV4510ECO.
How often should the insert be replaced?
Depending on the water quality, usually after 2 to 6 months. The lifespan depends on the contamination level of the incoming water and how often the filter is used.
How is the insert replaced?
Close the water supply, release the pressure with the tap behind the filter, and unscrew the housing with an installation key. Wash the housing and the head, insert the new element, seat the O-ring in the groove, and tighten the housing by hand.
Additional parameters
| Category: | filter cartridges - FP3, BIG |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | ESCHVCB4510ECO |
| Manufacturer: | IVAR |
| Type: | IVAR.BIG BLUE |
| Product: | filter cartridge |
| Size: | 4.5 × 10" |
| Porosity: | 10 µm |
| Material: | pressed activated carbon block |
| Application: | IVAR.BIG BLUE ESFPV4510ECO filter (1" F) |
| Water temperature: | +5 to +40 °C |
| Replacement interval: | usually 2–6 months |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.