Filter Insert IVAR.BIG BLUE 4.5 × 20" – 20 µm, PP melt-blown – SPECIAL OFFER – SALE
Code: ESCPV452020ECOProduct detailed description
The insert ESCPV452020ECO is a replacement filter element for the IVAR.BIG BLUE filter ESFPV4520ECO with dimensions 4.5 × 20" and 1" F connection. It is made of 100 % polypropylene using the melt-blown technology and captures fine mechanical impurities – sand, rust, mud or sediments – with a porosity of 20 µm.
- dimensions 4.5 × 20", porosity 20 µm
- material: 100 % polypropylene (melt-blown)
- for cold water with temperature +5 to +40 °C
The lifetime of the insert depends on the quality of the incoming water and the frequency of use – it is usually replaced after 2 to 6 months, or according to the water meter. The manufacturer recommends using only original inserts; using inserts from other manufacturers voids the warranty on the filter. When replacing, close the water supply, release the pressure with a tap behind the filter, unscrew the housing with a wrench, clean it, and before tightening, check the O-ring.
Technical parameters
| Code | ESCPV452020ECO |
| Manufacturer | IVAR |
| Type | IVAR.BIG BLUE |
| Type | filter insert |
| Dimensions | 4.5 × 20" |
| Porosity | 20 µm |
| Material | 100 % polypropylene (melt-blown) |
| Application | filter IVAR.BIG BLUE ESFPV4520ECO (1" F) |
| Water temperature | +5 to +40 °C |
| Replacement interval | usually 2–6 months |
Frequently asked questions
Which filter does the insert fit into?
Into the IVAR.BIG BLUE filter 4.5 × 20" with 1" F connection, code ESFPV4520ECO.
How often should the insert be replaced?
Depending on the water quality, usually after 2 to 6 months. The lifetime depends on the level of contamination in the incoming water and how often the filter is used.
How is the insert replaced?
Close the water supply, release the pressure with a tap behind the filter, and unscrew the housing with an installation wrench. Clean the housing and the head, insert the new element, seat the O-ring in the groove, and tighten the housing by hand.
Additional parameters
| Category: | filter cartridges - FP3, BIG |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | ESCPV452020ECO |
| Manufacturer: | IVAR |
| Type: | IVAR.BIG BLUE |
| Product: | filter cartridge |
| Size: | 4.5 × 20" |
| Porosity: | 20 µm |
| Material: | 100% polypropylene (melt-blown) |
| Application: | IVAR.BIG BLUE ESFPV4520ECO filter (1" F) |
| Water temperature: | +5 to +40 °C |
| Replacement interval: | usually 2–6 months |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.