Hornisse – electric underfloor heating mat for 5 m², dimensions 0.5 x 10 m

Product detailed description

Electric floor heating with the Hornisse HO-MAT 5 mat covers an area of 5 m². The mat has dimensions of 0,5 x 10 m, draws a current of 3,3 A at a voltage of 230 V and achieves a power of 750 W, which corresponds to five square meters at a specific power of 150 W/m². The heating wires are embedded in a mesh and, after connecting to the electrical network, evenly heat the entire surface. The mat is suitable for homes, offices and commercial premises and can be used under tiles and under panels.

Main Features

• heated area 5 m² at mat dimensions 0,5 x 10 m
• mat power 750 W, specific power 150 W/m²
• even heating over the entire surface with lower energy losses
• thin construction, mat thickness 3,6 mm
• cable spacing of heating cables 8 cm
• one-sided power supply, power cable length 2,5 m
• fast floor heating up
• easy installation directly under tiles

Technical Data

Kit Contents

• electric mat with connecting cable
• flexible protective tube for the sensor
• installation instructions

Use and Installation

The mat is installed directly under the tiles, so the floor is heated without long waiting times. You will especially appreciate it in the bathroom, where it heats the floor to a pleasant temperature for the feet and accelerates the drying of a wet floor. Never cut or shorten the heating cable and make sure that the cables do not cross or overlap each other. The electrical connection must be carried out by a qualified person. The protective tube is intended for the floor temperature sensor and thermostat, which controls the heating, and is not part of the kit, so it must be selected separately. Details on the installation can be found in the attached instructions.

Frequently Asked Questions

What power does the HO-MAT 5 mat have?

At a voltage of 230 V and a specific power of 150 W/m², the mat has a power of 750 W. The current is 3,3 A and the resistance is 70,5 Ω.

What is included in the kit?

An electric mat with a connecting cable, a flexible protective tube for the sensor and installation instructions. The thermostat must be selected separately.

Under which surfaces can the mat be used?

It is installed directly under the tiles and, according to the description, is also suitable for other types of floor surface treatments, for example panels.