Hybrid Inverter CARSPA MKS3200 24V/3000W with MPPT Regulator

Product detailed description

The hybrid inverter CARSPA MKS3200 is a combination of a pure sine wave inverter, a backup power source (UPS), and an MPPT regulator for solar panels. The device ensures backup power from the public grid or a generator, charges batteries, and at the same time controls the power of solar panels. You can set the backup priority according to your needs, either with a priority for the public grid and backup from batteries or PV panels, or vice versa.

Main Advantages

• Pure sine wave – suitable for all types of appliances.
• MPPT solar regulator – maximizes yield from solar panels.
• Clear LCD display – easy setting of operating modes, power supply priorities and other parameters.
• Automatic battery charging from the grid – if solar energy is not available, the battery is charged from the grid.
• Protection functions – built-in circuit breaker against short circuit and overload, protection against overheating, overvoltage and excessive battery discharge.
• Battery type support – AGM, GEL or LiFePO4 (LiFePO4 is recommended only for experienced users).
• Comfort functions – acoustic fault warning, cold start function, energy-saving mode and powerful active cooling.

Technical Specifications

• Input voltage: 90–280 V AC, frequency 50/60 Hz (automatic detection)
• Output: 1 phase, 230 V AC ±5 %, pure sine wave, switching delay 10–20 ms
• Inverter power: 3000 W / 3200 VA
• Peak power: 6000 W / 6200 VA for 5 seconds
• Battery voltage: 24 V (maintenance voltage 27 V, overvoltage 32 V)
• Maximum charging current from the grid: 60 A
• MPPT regulator: max. current 80 A, max. panel power 3000 W, max. panel voltage (Voc) 450 V DC, operating range 55–430 V
• Self-consumption: 2 W, efficiency 98 %
• Dimensions: 405 × 286 × 96 mm, weight 5.4 kg
• Operating temperature: 0 to 55 °C
• Protection class: IP20

Warning: The island output is single-phase without a neutral conductor, so it cannot be connected in parallel to the distribution grid (DS). The battery type must be correctly selected during setup. The product requires professional installation.