Pulse water meter, threaded, dry-running, with HIRSCHMANN connector IVAR.IVLI DRY 5/4″ M
Code: 120.090.30AProduct detailed description
The IVAR.IVLI DRY meter (120.090.30A) is a dry-running threaded water meter with a pulse output for measuring water consumption and reporting flow. It has a 5/4″ male-thread connection and a HIRSCHMANN connector. It is also used with dosing pumps of the IVAR.DOSAMATIC PPI A and X5MA series; the connecting cable with a Hirschmann connector is about 3 m long. The meter is MID certified, has a measuring range of R80 and pressure class PN 16.
Technical data
- Hydraulic connection (inlet/outlet): 5/4″, male thread
- Max. flow: 10 m³/h
- Nominal flow: 5 m³/h
- Min. flow: 100 l/h
- Water (ambient) temperature: 5–40 °C (5–50 °C)
- Nominal pressure: PN 16
- Certification and measuring range: MID, R80
- Connecting cable: with Hirschmann connector, approx. 3 m
- Compatible dosing pumps: IVAR.DOSAMATIC PPI A, X5MA
The stated flows apply to water at 5 – 40 °C, and the ambient temperature may be 5 – 50 °C. Before ordering, check that the 5/4″ size matches your pipework. Have the installation and commissioning carried out by a qualified contractor.
Technical data
| Code | 120.090.30A |
| Manufacturer | IVAR |
| Type | IVAR.IVLI DRY |
| Hydraulic connection (inlet/outlet) | 5/4″, male thread |
| Max. flow | 10 m³/h |
| Nominal flow | 5 m³/h |
| Min. flow | 100 l/h |
| Water (ambient) temperature | 5–40 °C (5–50 °C) |
| Nominal pressure | PN 16 |
| Certification and measuring range | MID, R80 |
| Connecting cable | with Hirschmann connector, approx. 3 m |
| Compatible dosing pumps | IVAR.DOSAMATIC PPI A, X5MA |
Frequently asked questions
Which dosing pumps is the meter used with?
The manufacturer names the IVAR.DOSAMATIC PPI A and X5MA series dosing pumps.
What are the flow ratings of meter 120.090.30A?
The maximum flow is 10 m³/h, the nominal flow 5 m³/h and the minimum flow 100 l/h.
Additional parameters
| Category: | Dosing pumps |
|---|---|
| Warranty: | 2 years |
| Code: | 120.090.30A |
| Manufacturer: | IVAR |
| Type: | IVAR.IVLI DRY |
| Hydraulic connection (inlet/outlet): | 5/4″, male thread |
| Max. flow: | 10 m³/h |
| Nominal flow: | 5 m³/h |
| Min. flow: | 100 l/h |
| Water (ambient) temperature: | 5–40 °C (5–50 °C) |
| Nominal pressure: | PN 16 |
| Certification and measuring range: | MID, R80 |
| Connecting cable: | with Hirschmann connector, approx. 3 m |
| Compatible dosing pumps: | IVAR.DOSAMATIC PPI A, X5MA |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
