Compression fittings or adapters for EK connections are used to fix a pipe to an EK (Eurocone) thread, which is found on the branches of manifolds and other heating components.
EK – the Eurocone thread is a 3/4“ thread with a specially tapered shape onto which the seal seats.
|
Compression fitting for PEX-AL-PEX 16 x 2 pipe Compression fitting for PEX-AL-PEX 18 x 2 pipe Compression fitting for PEX-AL-PEX 20 x 2 pipeCompression fitting for PEX-AL-PEX 26 x 3 pipe
|
Polybutylene (Hepworth) Compression fitting for PB 15 mm pipe Compression fitting for PB 16 mm pipe |
|
|
|
|
Compression fitting with 1/2" nipple for 16 x 2 pipe Compression fitting with 3/4" nipple for 16 x 2 pipe Compression fitting with 1/2" nipple for 20 x 2 pipe Compression fitting with 3/4" nipple for 20 x 2 pipe Compression fitting with 3/4" nipple for 26 x 3 pipe Compression fitting with 1" nipple for 26 x 3 pipe Compression fitting with 1" nipple for 32 x 3 pipe (With a nipple. Used, for example, for connecting ball valves.) |
|
-
Hello, I would like to ask whether you also sell press couplings for PEX-AL-PEX pipe. Thank you
-
Hello, you can find press couplings here: https://www.atria.sk/vykurovacia-technika/kurenie-profesionalne/lisovacie-fitingy-spojky/ Have a nice day.
-
Hello, I would like to ask whether you also have fittings in a 10mm diameter with a transition to a half-inch female thread. Thank you
-
Hello. Not for PEX-AL-PEX, only this: https://www.atria.sk/vykurovacia-technika/kurenie-hepworth-profesionalne-a-jednoducho-hep2o/stenove-kurenie-vykurovanie/ Have a nice day.
-
Hello. How are these couplings joined to the pipe, please? Do I need pliers?
-
Hello. You need a compression fitting. The fitting is slid onto the pipe and, together with the pipe, screwed into the manifold, for example; the nut then presses the ring against the tapered surface and compresses it. Have a nice day.
-
I would like to ask whether you could advise me: can I use plastic pipes, the kind used for water, to connect the central heating to the radiators?
-
Hello. Yes, the pipe is intended for drinking water, for radiators and for underfloor heating alike: https://www.atria.sk/potrubie-pex-al-pex-16-x-2/ Have a nice day.