Mechanical impurities filter IVAR.BIG BLUE 4.5 × 10" – 1" F, without filter insert – SPECIAL OFFER
Code: ESFPV4510ECOProduct detailed description
IVAR.BIG BLUE (code ESFPV4510ECO) is a two-part polypropylene filter that is installed on the cold water supply pipe. It captures mechanical impurities – rust particles, sand, silt and deposits – and removes turbidity. It is suitable for water from public water supply, well water and rainwater.
Technical data
- filter insert size 4.5 × 10"
- connection 1" internal thread
- max. flow rate 50 l/min
- operating pressure 2 to 6 bar (PN 6), water temperature +5 to +40 °C
Suitable filter inserts
- ESCPV45105ECO – 5 µm, 100 % polypropylene (melt-blown)
- ESCHVCB4510ECO – 10 µm, block of compressed activated carbon
- ESCHV4510ECO – 40 µm, granulated activated carbon filling
Packaging and installation
It is delivered with the filter body, wall bracket with 4 screws, installation key for replacing the insert and instructions – the filter insert is not part of the packaging. Installation should be entrusted to a qualified plumber, seal the threads with PTFE tape and the manufacturer recommends a pressure regulator before the filter. Replace the insert according to the water quality, usually after 2 to 6 months; the filter housing has a lifespan of 5 years. The filter is not intended for hot water or for microbiologically unsuitable water.
Technical parameters
| Code | ESFPV4510ECO |
| Manufacturer | IVAR |
| Type | IVAR.BIG BLUE |
| Type | two-part mechanical impurity filter |
| Insert size | 4.5 × 10" |
| Connection | 1" F |
| Max. flow rate | 50 l/min |
| Operating pressure | 2–6 bar (PN 6) |
| Water temperature | +5 to +40 °C |
| Material | polypropylene (PP) |
| Filter insert | not part of the packaging |
| Lifespan of the housing | 5 years |
Frequently asked questions
Is the filter insert part of the packaging?
No. The packaging includes the filter body, wall bracket with 4 screws, installation key and instructions. Choose the 4.5 × 10" insert according to the water quality.
Which inserts fit into the filter?
The 4.5 × 10" filter fits the inserts ESCPV45105ECO (5 µm, PP melt-blown), ESCHVCB4510ECO (10 µm, block of activated carbon) and ESCHV4510ECO (40 µm, granulated activated carbon).
How often should the insert be replaced?
According to water quality, usually after 2 to 6 months, or according to the water meter or when its capacity decreases. The manufacturer recommends only original IVAR.BIG BLUE inserts.
Can I use the filter for hot water?
No, the filter is intended for cold water with a temperature of +5 to +40 °C. It is not suitable for microbiologically unsuitable water without prior disinfection.
Additional parameters
| Category: | filters for drinking water |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | ESFPV4510ECO |
| Manufacturer: | IVAR |
| Type: | IVAR.BIG BLUE |
| Product: | two-piece mechanical impurity filter |
| Cartridge size: | 4.5 × 10" |
| Connection: | 1" F |
| Max. flow: | 50 l/min |
| Operating pressure: | 2–6 bar (PN 6) |
| Water temperature: | +5 to +40 °C |
| Material: | polypropylene (PP) |
| Filter cartridge: | not included |
| Housing service life: | 5 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.