Mineralizing filter insert IVAR.MFV – postfilter for water treatment units IVAR.MO550 and IVAR.SOLO – SPECIAL OFFER
Code: ESPD2010ECOProduct detailed description
Minerals back into water
The IVAR.MFV insert is installed after the reverse osmosis membrane and enriches the treated water with minerals – their natural source, for example calcium and magnesium – and at the same time improves its taste.
Where is it used
- IVAR.MO550 – fifth filtration stage, connected to the tap on the countertop
- IVAR.SOLO – optional post-filter at the output of the water treatment unit
- IVAR.CROSS MAX – optional post-filter at the output of the water treatment unit
In the MO550 unit, the water may be slightly cloudy after installing the mineralizing cartridge – flush out a few containers into the drain until it becomes clear. A change in taste after replacement is normal, as the new material has the highest capacity at the beginning. Adhere to the replacement intervals according to the instructions for your unit.
Technical parameters
| Code | ESPD2010ECO |
| Brand | IVAR |
| Type | IVAR.MFV |
| Kind | mineralizing insert – post-filter |
| Designed for | IVAR.MO550, IVAR.SOLO, IVAR.CROSS MAX |
| Filling | natural source of minerals (calcium, magnesium) |
| Packaging | 1 pc |
Frequently asked questions
Which IVAR water treatment units is the MFV insert suitable for?
It is the fifth stage of the IVAR.MO550 unit and as an optional mineralizing post-filter, it can be added to the output of the IVAR.SOLO and IVAR.CROSS MAX units.
Why does the water have a different taste after replacing the mineralizing insert?
The new insert has maximum capacity at the beginning of its life, so the change in taste and smell is normal. During operation, mineralization gradually decreases, so it is important to adhere to the replacement intervals.
Additional parameters
| Category: | UV lamps and reverse osmosis systems |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | ESPD2010ECO |
| Brand: | IVAR |
| Type: | IVAR.MFV |
| Kind: | remineralising cartridge – post-filter |
| Intended for: | IVAR.MO550, IVAR.SOLO, IVAR.CROSS MAX |
| Filling: | natural mineral source (calcium, magnesium) |
| Pack size: | 1 piece |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.