Replacement filter insert IVAR.APFV ISO Coarse (G3) for ECOCOMFORT 3 and RHINOCOMFORT 3
Code: IVAP1984Product detailed description
The IVAR.APFV filter insert (code IVAP1984) replaces the filter in the IVAR.ECOCOMFORT 3 and IVAR.RHINOCOMFORT 3 ventilation units. It belongs to class ISO Coarse (G3) and traps dirt from the supply air, protecting both the unit and the indoor air quality.
Filter maintenance
- before cleaning or replacing, disconnect the unit from the power supply and remove it as described in the manual
- the filter is washed in cold water and must dry completely before refitting
- the Intelliclima+ app can remind you to check the filter approximately every 1000 operating hours
According to the manufacturer, maintenance should be carried out by a qualified technician. For the ECOCOMFORT PLUS 160 unit, the insert with code IVAP19978 is intended.
Technical data
| Code | IVAP1984 |
| Brand | IVAR |
| Type | IVAR.APFV |
| Product | replacement filter insert |
| Filter class | ISO Coarse (G3) |
| For | IVAR.ECOCOMFORT 3, IVAR.RHINOCOMFORT 3 |
Frequently asked questions
Can the filter be cleaned or must it be replaced?
According to the unit manual, the filter is washed in cold water and must dry completely before refitting. A worn filter is replaced with this insert.
How often should the filter be checked?
Filter management can be enabled in the Intelliclima+ app; depending on the speed, it reminds you to check, clean or replace the filter after about 1000 operating hours.
Does the insert also fit the ECOCOMFORT PLUS 160?
No, this insert is for the ECOCOMFORT 3 and RHINOCOMFORT 3. The ECOCOMFORT PLUS 160 needs the insert with code IVAP19978.
Additional parameters
| Category: | Decentralized ventilation units and accessories |
|---|---|
| Warranty: | 2 years |
| Type: | filter |
| Code: | IVAP1984 |
| Brand: | IVAR |
| Type: | IVAR.APFV |
| Product: | replacement filter insert |
| Filter class: | ISO Coarse (G3) |
| For: | IVAR.ECOCOMFORT 3, IVAR.RHINOCOMFORT 3 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.