Spare bowl O-ring – for IVAR.BIG filters
Code: MG011220Related products
Product detailed description
O-ring MG011220 is a genuine IVAR spare part for the bowl of IVAR.BIG two-piece filters for mechanical impurities. According to the manufacturer's designation, it fits both IVAR.BIG.934 (9 3/4") and IVAR.BIG.200 (20") filters. It seals the joint between the bowl and the filter head.
It is advisable to check the ring's condition at every filter cartridge change. After inserting the cartridge, screw the bowl back on and tighten it by hand, then fill the filter with water gradually and check for leaks.
Technical data
| Code | MG011220 |
| Manufacturer | IVAR |
| Type | IVAR.PRISLUSENSTVI |
| Item | spare bowl O-ring |
| Intended for | IVAR.BIG.934 and IVAR.BIG.200 filters |
| Unit | 1 pc |
Frequently asked questions
Which filters does the O-ring fit?
According to the manufacturer's designation, it is intended for the bowls of IVAR.BIG.934 (9 3/4") and IVAR.BIG.200 (20") filters. It seals the joint between the bowl and the filter head.
When should the O-ring be replaced?
It is a good idea to check the ring's condition each time the filter cartridge is replaced. If the joint between the bowl and the filter head stops sealing, replace the O-ring.
How do I refit the bowl correctly after replacement?
First place the filter cartridge in the bowl, then screw the bowl into the filter head and hand-tighten it. Finally, fill the filter with water gradually and check for leaks.
Additional parameters
| Category: | filters and filter cartridges |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | MG011220 |
| Manufacturer: | IVAR |
| Type: | IVAR.PRISLUSENSTVI |
| Item: | spare bowl O-ring |
| Intended for: | IVAR.BIG.934 and IVAR.BIG.200 filters |
| Unit: | 1 pc |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.