IVAR PE-RT pipe 17 × 2 mm for underfloor heating – EVOH oxygen barrier, 600 m coil
Code: 70017600PProduct detailed description
The IVAR.PE-RT 17 × 2 pipe is a flexible plastic pipe for wet underfloor heating circuits. It is made of polyethylene of raised temperature resistance (PE-RT) in a five-layer construction with an EVOH diffusion oxygen barrier and complies with EN ISO 22391. It is supplied in a 600 m coil, colour red.
Properties
- outside diameter 17 mm, wall thickness 2 mm, inside diameter 13 mm
- water content 0.133 l per metre
- pressure class PN 6 at 90 °C and PN 10 at 60 °C
- oxygen permeability at 40 °C max. 0.32 g/m³ per day
- roughness 0.007 mm, thermal conductivity 0.4 W/m·K
The pipe is tough, withstands pressure well at high temperatures, does not corrode, resists limescale build-up and has high chemical resistance. IVAR also specifies it for dry underfloor heating systems with the IVAR.ST 20 AL and IVAR.ST 30 AL system boards. The pipes are joined with IVAR.TP or RP compression fittings or IVAR.PT press fittings.
The 16 × 2 mm size is supplied in a 500 m coil under code 70016500P.
Technical data
| Code | 70017600P |
| Manufacturer | IVAR |
| Type | IVAR.PE-RT |
| Size | 17 × 2 mm |
| Inside diameter | 13 mm |
| Water content | 0.133 l/m |
| Material | PE-RT, five-layer with EVOH oxygen barrier |
| Pressure class | PN 6 at 90 °C / PN 10 at 60 °C |
| Oxygen permeability (40 °C) | max. 0.32 g/m³ per day |
| Thermal conductivity | 0.4 W/m·K |
| Standard | EN ISO 22391 |
| Colour | red |
| Packaging | 600 m coil |
Frequently asked questions
What pressure and temperature can the pipe withstand?
The pipe has pressure class PN 6 at 90 °C and PN 10 at 60 °C. The operating temperature range according to EN ISO 22391 is 20 to 90 °C.
Which fittings are used to join the pipe?
IVAR.TP or RP compression fittings, or IVAR.PT press fittings.
Does the pipe have an oxygen barrier?
Yes, it is a five-layer PE-RT pipe with an EVOH diffusion oxygen barrier. Oxygen permeability at 40 °C is at most 0.32 g/m³ per day.
How much water does the pipe hold?
The 17 × 2 mm pipe has an inside diameter of 13 mm and holds 0.133 l of water per metre.
Additional parameters
| Category: | PEX, PE-RT pipe |
|---|---|
| Warranty: | 2 years |
| Pack length: | over 200 m |
| Tube size: | 17x2 |
| Pipe type: | PE-RT |
| Code: | 70017600P |
| Manufacturer: | IVAR |
| Type: | IVAR.PE-RT |
| Size: | 17 × 2 mm |
| Inside diameter: | 13 mm |
| Water content: | 0.133 l/m |
| Material: | PE-RT, five-layer with EVOH oxygen barrier |
| Pressure class: | PN 6 at 90 °C / PN 10 at 60 °C |
| Oxygen permeability (40 °C): | max. 0.32 g/m³ per day |
| Thermal conductivity: | 0.4 W/m·K |
| Standard: | EN ISO 22391 |
| Colour: | red |
| Packaging: | 600 m coil |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.