Reverse Osmosis Membrane 50 GPD IVAR.M GPD for IVAR.MO550 Water Treatment Unit
Code: ESCSV181250ECOProduct detailed description
Fourth stage of the water purifier MO550
The IVAR.MO550 water purifier cleans water in five stages – a 5 µm polypropylene filter, a block of compressed activated carbon, a 1 µm polypropylene filter, a reverse osmosis membrane, and a mineralization cartridge. The 50 GPD membrane produces approximately 190 liters of purified water per day (7.9 l/h). Since this is a slower process, the MO550 stores the water in a tank (12 l, of which 5 l is available for immediate use) and delivers it from there as needed.
When to replace the membrane
- at least once a year, no later than after 1.5 years
- sooner if the filtration slows down significantly or the TDS of the purified water exceeds the allowed limit
- replace the pre-filters at least once every 6 months – neglecting to do so can damage the membrane
Technical specifications
| Code | ESCSV181250ECO |
| Brand | IVAR |
| Type | IVAR.M GPD |
| Type of product | reverse osmosis membrane (4th stage) |
| Capacity | 50 GPD (approx. 190 l/day, 7.9 l/h) |
| Intended for | IVAR.MO550 (ESMO550MPECO) |
| Replacement interval | at least once a year, no later than after 1.5 years |
| Packaging | 1 pc |
Frequently asked questions
How often should the membrane in the IVAR.MO550 be replaced?
It is recommended at least once a year, no later than after 1.5 years. Earlier replacement may be necessary if the filtration slows down significantly or the TDS level in the purified water exceeds the allowed limit.
Why does the MO550 purifier have a tank?
The 50 GPD membrane produces about 7.9 liters of water per hour, which is not enough for immediate dispensing. The purifier therefore stores the water in a tank and delivers it from there as needed.
Additional parameters
| Category: | UV lamps and reverse osmosis systems |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | ESCSV181250ECO |
| Brand: | IVAR |
| Type: | IVAR.M GPD |
| Kind: | reverse osmosis membrane (4th stage) |
| Capacity: | 50 GPD (approx. 190 l/day, 7.9 l/h) |
| Intended for: | IVAR.MO550 (ESMO550MPECO) |
| Replacement interval: | at least once a year, at the latest after 1.5 years |
| Pack size: | 1 piece |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.