RO Plus Cartridge IVAR.SOLO RO for IVAR.SOLO Water Treatment Unit – 500 GPD Membrane + Carbon – SPECIAL OFFER
Code: ESCSVPDRO500Product detailed description
Complete filtration in one cartridge
The IVAR.SOLO system uses a single replaceable cartridge that combines two stages. The 500 GPD reverse osmosis membrane removes up to 99% of contaminants including viruses, bacteria, heavy metals and PFAS, and reduces the content of dissolved substances. The carbon post filtration then improves the taste and smell of the water.
When and how to replace
- every 12 months, sooner if the water quality is poor or consumption is high
- signs: reduced filtration, change in color, taste or smell of the water, sediment or higher TDS
- shut off the cold water supply and disconnect the power adapter
- open the security lock of the cover, remove the old cartridge and insert the new one without protective caps
Use only original cartridges; according to the instructions, service and maintenance should be carried out by a qualified technician.
Technical specifications
| Code | ESCSVPDRO500 |
| Brand | IVAR |
| Type | IVAR.SOLO RO |
| Type | combined cartridge 2 in 1 (RO + carbon) |
| Membrane | RO 500 GPD |
| Designed for | IVAR.SOLO (ESMO1500PECO) |
| Replacement interval | 12 months |
| Packaging | 1 piece |
Frequently asked questions
How often should the RO plus cartridge be replaced in IVAR.SOLO?
Every 12 months, sooner if the water quality is poor or the system is used intensively. A weaker filtration, change in taste or smell, or higher TDS will also indicate the need for replacement.
Are there any other filters to replace in IVAR.SOLO?
No, the membrane and carbon filter are combined in this single cartridge. If you have the mineralizing post filter IVAR.MFV installed at the output, it must be replaced separately.
Additional parameters
| Category: | UV lamps and reverse osmosis systems |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | ESCSVPDRO500 |
| Brand: | IVAR |
| Type: | IVAR.SOLO RO |
| Kind: | combined 2-in-1 cartridge (RO + carbon) |
| Membrane: | RO 500 GPD |
| Intended for: | IVAR.SOLO (ESMO1500PECO) |
| Replacement interval: | 12 months |
| Pack size: | 1 piece |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.