Angle ball valve with union 1" MM for water, blue butterfly handle – IVAR.6775
Code: 6775R084Product detailed description
Code 6775R084 is the IVAR.6775 angle ball valve in size 1" with a male – male thread (MM) connection. It turns the pipe run through 90°, shuts it off completely and, thanks to the union, can be connected or removed without rotating the whole valve. The butterfly handle is blue.
Applications
- cold water, hot water and compressed air lines
- domestic, industrial and agricultural installations
- non-aggressive media up to +120 °C, without steam
- drinking water – the valve is approved
Design
- nickel-plated CW617N brass body, brass ball and stem
- PTFE ball seals, stem sealed with Viton and EPDM O-rings
- union with brass nut and tailpiece, EPDM tailpiece O-ring
- full bore, bore diameter Ø 25 mm
- extended threads on both ends to EN ISO 228/1
- lacquered aluminium butterfly handle, 90° rotation
Installation and operation
The valve is supplied fully open. When tightening the joint, hold the valve body against the direction in which the pipe turns so that it is not damaged. Seal the threads with PTFE tape, cord or thread, or with sealing paste or gel – the manufacturer does not recommend hemp. Use the valve only fully open or fully closed, and turn it through its full range once or twice a quarter to prevent deposits forming on the seals.
The same valve with red butterfly handle has code 6783R084 (type IVAR.6783); both types are made in sizes from 1/2" to 1".
Technical data
| Code | 6775R084 |
| Manufacturer | IVAR |
| Type | IVAR.6775 |
| Size | 1" |
| Connection | male – male thread (MM) |
| Handle colour | blue |
| Max. operating pressure | PN 10 (at +120 °C) |
| Max. operating temperature | +120 °C, without steam |
| Threads | EN ISO 228/1 (DIN 259) |
| Body material | nickel-plated brass CW617N |
| Seals | PTFE, EPDM and Viton O-rings |
| Bore Ø A | 25 mm |
| Spanner size (Ch) | 46/38 mm |
| Weight | 697 g |
Frequently asked questions
What is the difference between the blue and the red version?
According to the technical data sheet, types IVAR.6775 and IVAR.6783 have the same dimensions, materials and operating data. Only the colour of the butterfly handle differs.
What is the union on the valve for?
The union, made up of a nut and tailpiece, lets you connect the valve to the pipework or remove it later without having to rotate the whole fitting.
Can I use the valve to regulate the flow?
No. The ball valve is intended only for fully opening or fully closing and must not be operated in an intermediate position.
How should the valve be left when the system is drained because of frost?
If the system is drained because of the risk of freezing, the ball valve must be left half open in the 45° position.
Additional parameters
| Category: | corner ball valves |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.697 kg |
| Valve / fitting type: | angle valve |
| Thread size: | 1" |
| Connection type: | male thread |
| Code: | 6775R084 |
| Manufacturer: | IVAR |
| Type: | IVAR.6775 |
| Size: | 1" |
| Connection: | male – male thread (MM) |
| Handle colour: | blue |
| Max. operating pressure: | PN 10 (at +120 °C) |
| Max. operating temperature: | +120 °C, without steam |
| Threads: | EN ISO 228/1 (DIN 259) |
| Body material: | nickel-plated brass CW617N |
| Seals: | PTFE, EPDM and Viton O-rings |
| Bore Ø A: | 25 mm |
| Spanner size (Ch): | 46/38 mm |
| Weight: | 697 g |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.