IVAR.SRVM ECOMIX actuator for DN 25 / DN 32 boiler modules – 230 V, 3-point, 120 s, 5 Nm – SALE
Code: IVA20317291Related products
Product detailed description
The IVAR.SRVM ECOMIX actuator, code IVA20317291, turns the stem of the 3-way mixing valve in IVAR boiler modules sized DN 25 and DN 32 and positions the valve according to commands from the heating controller. This version connects to 230 V ~ 50 Hz and is driven by a 3-point signal.
Key features
- 90° rotation angle, 5 Nm torque, 120 s running time
- power consumption 2.5 – 4 VA, IP 42 protection, protection class II
- compact PC thermoplastic housing measuring 95 × 80 × 92 mm – the mounting position can be changed in 90° steps and the actuator fits most insulation shells
- when the operating limits are reached, the actuator disconnects electrically and stays de-energised
- automatic operation, switchable to manual control when needed
- LED indicator of the operating status
Installation and wiring
An adapter is fitted onto the stem of the mixing valve, and the actuator is slid onto it while holding down the mounting button on the back. Installation and electrical connection may only be carried out by a person with appropriate electrical qualifications; every supply conductor must be connected through a disconnecting device with a contact gap of at least 3 mm.
For modulating control, the same range includes version IVA20317294 with 24 V supply and a 0–10 / 2–10 V signal.
Technical data
| Code | IVA20317291 |
| Manufacturer | IVAR |
| Type | IVAR.SRVM ECOMIX |
| Application | boiler modules with 3-way mixing valve DN 25 / DN 32 |
| Supply voltage | 230 V ~ 50 Hz |
| Control signal | 3-point |
| Torque | 5 Nm |
| Rotation angle | 90° |
| Running time | 120 s |
| Power consumption | 2.5 – 4 VA |
| Protection rating | IP 42 (EN 60529) |
| Protection class | II (EN 60730-1) |
| Ambient temperature | up to 50 °C |
| Housing material | PC thermoplastic |
| Dimensions | 95 × 80 × 92 mm |
Frequently asked questions
Which boiler modules is the actuator designed for?
For IVAR boiler modules fitted with a 3-way mixing valve in sizes DN 25 and DN 32.
What control signal does this version use?
Version IVA20317291 is powered by 230 V and driven by a 3-point signal. If your controller outputs 0–10 V or 2–10 V, choose the 24 V version IVA20317294.
Can the valve also be adjusted by hand?
Yes, the actuator can be switched from automatic mode to manual control, and the valve is then set with the manual operating element.
Who may wire the actuator?
Installation and electrical connection must be done by a qualified person with electrical training, in line with applicable standards.
Additional parameters
| Category: | actuators for MIX valves |
|---|---|
| Warranty: | 24 |
| Availability: | In stock or at supplier |
| Code: | IVA20317291 |
| Manufacturer: | IVAR |
| Type: | IVAR.SRVM ECOMIX |
| Application: | boiler modules with 3-way mixing valve DN 25 / DN 32 |
| Supply voltage: | 230 V ~ 50 Hz |
| Control signal: | 3-point |
| Torque: | 5 Nm |
| Rotation angle: | 90° |
| Running time: | 120 s |
| Power consumption: | 2.5 – 4 VA |
| Protection rating: | IP 42 (EN 60529) |
| Protection class: | II (EN 60730-1) |
| Ambient temperature: | up to 50 °C |
| Housing material: | PC thermoplastic |
| Dimensions: | 95 × 80 × 92 mm |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.