IVAR.DEFEMN 100 EM column filter for removing iron and manganese from water

Code: IVA.110.DFEM
Not rated Rating details
2 463,69 € –20 %
Stĺpcový filter IVAR.DEFEMN 100 EM na odstraňovanie železa a mangánu z vody
2 463,69 € –20 % 1 970,95 € / pcs 1 602,40 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

IVAR.DEFEMN 100 EM (code IVA.110.DFEM) is a column filter for treating drinking and process water. It captures iron, manganese, ammonium ions and the total hardness of the water and softens it at the same time. It includes a programmable electronic WSCI control unit (time or volume control), a mixing bypass and a tank for the regeneration salt.

Data from the data sheet

  • dimensions (w × d × h) 365 × 365 × 1861 mm, inlet/outlet connection 1"
  • brine tank Ø 516 × 950 mm
  • max. operating pressure 6 bar, treated water temperature 5 – 35 °C
  • regeneration with tablet salt GEL.SŮL CS (code 410.600.44CS)
  • adjustable water hardness at the outlet
  • the result depends on the analysis of the raw water, which also affects the filter capacity

Required parts of the water treatment plant

  • mechanical impurity filter (for example GEL.DEPURA)
  • sampling valves, shut-off cocks, pressure gauges and a drain connection
  • a bypass of the whole water treatment plant and of the filter itself

The filter must be connected to a drain with sufficient outflow and to the 230 V mains; allow at least 200 mm of handling space in height. Leave installation to a professional.

Technical data

CodeIVA.110.DFEM
ManufacturerIVAR
TypeIVAR.DEFEMN 100 EM
FunctionRemoval of iron, manganese and ammonium ions, softening
Dimension365 × 365 × 1861 mm
Connection1"
Brine tank dimensionsØ 516 × 950 mm
Max. operating pressure6 bar
Temperature range5 – 35 °C
Control unitWSCI

Frequently asked questions

What does the IVAR.DEFEMN 100 EM filter remove?
Iron, manganese, ammonium ions and the total hardness of the water; the level depends on the analysis of the raw water.

What salt does the filter use for regeneration?
Pure tablet salt GEL.SŮL CS with the code 410.600.44CS.

Which parts of the water treatment plant are required with the filter?
A mechanical impurity filter, sampling valves, shut-off cocks, pressure gauges, a drain connection and a bypass.

Additional parameters

Category: column filters
Warranty: 2 years
Code: IVA.110.DFEM
Manufacturer: IVAR
Type: IVAR.DEFEMN 100 EM
Function: Removal of iron, manganese and ammonium ions, softening
Dimension: 365 × 365 × 1861 mm
Connection: 1"
Brine tank dimensions: Ø 516 × 950 mm
Max. operating pressure: 6 bar
Temperature range: 5 – 35 °C
Control unit: WSCI

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.