Column filter for iron and manganese removal IVAR.DEFEMN 140-5
Code: IVA.114.DF5Product detailed description
The IVAR.DEFEMN 140-5 filter removes iron and manganese from drinking and process water. The WSCI electronic control unit starts regeneration by time or by the volume of water passed. Code IVA.114.DF5 is size 140 of the series marked -5; the dimensions and flow below apply to this size.
Technical data
- Dimensions (W × D × H): 365 × 365 × 1861 mm
- Hydraulic connection (inlet/outlet): 5/4″
- Indicative operating flow: 7.8 m³/h
- Max. operating pressure: 6 bar
- Treated water temperature: 5–35 °C
- Power supply: 230 V
- Drain connection: 3/4″, male thread
- Control unit: WSCI
The filter must be completed with a proportional dosing pump and accessories and connected to a drain and a 230 V supply. It has to be flushed before start-up, and the manufacturer recommends commissioning by a specialist company.
Technical data
| Code | IVA.114.DF5 |
| Manufacturer | IVAR |
| Type | IVAR.DEFEMN 140-5 |
| Dimensions (W × D × H) | 365 × 365 × 1861 mm |
| Hydraulic connection (inlet/outlet) | 5/4″ |
| Indicative operating flow | 7.8 m³/h |
| Max. operating pressure | 6 bar |
| Treated water temperature | 5–35 °C |
| Power supply | 230 V |
| Drain connection | 3/4″, male thread |
| Control unit | WSCI |
Frequently asked questions
What has to be added to the IVAR.DEFEMN 140-5 filter?
Mainly a proportional dosing pump with accessories, plus pressure gauges, sampling valves, shut-off valves and a bypass around the whole treatment line. A granular activated-carbon filter is recommended downstream.
How is the filter connected to the drain and to power?
The drain goes to a sewer of sufficient capacity through the 3/4″ male-thread connection on the control unit. Supply is 230 V.
Additional parameters
| Category: | column filters |
|---|---|
| Warranty: | 2 years |
| Code: | IVA.114.DF5 |
| Manufacturer: | IVAR |
| Type: | IVAR.DEFEMN 140-5 |
| Dimensions (W × D × H): | 365 × 365 × 1861 mm |
| Hydraulic connection (inlet/outlet): | 5/4″ |
| Indicative operating flow: | 7.8 m³/h |
| Max. operating pressure: | 6 bar |
| Treated water temperature: | 5–35 °C |
| Power supply: | 230 V |
| Drain connection: | 3/4″, male thread |
| Control unit: | WSCI |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
