Column filter for sediment removal from water IVAR.DESAND 140-5

Code: IVA.614.DS5
Not rated Rating details
2 437,86 € –20 %
Stĺpcový filter na odstraňovanie kalov z vody IVAR.DESAND 140-5
2 437,86 € –20 % 1 950,29 € / pcs 1 585,60 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

The IVAR.DESAND 140-5 filter retains sludge and mechanical impurities in drinking and service water. The WSTC electronic unit controls it, and it regenerates with water alone, without salt. Code IVA.614.DS5 is size 140 of the series marked -5; the dimensions and flow below refer to it.

Technical data

  • Dimensions (W × D × H): 365 × 365 × 1861 mm
  • Hydraulic connection (inlet/outlet): 5/4″
  • Indicative operating flow: 8.4 m³/h
  • Max. operating pressure: 6 bar
  • Treated water temperature: 5–35 °C
  • Power supply: 230 V
  • Drain connection: 3/4″, male thread
  • Control unit: WSTC

The drain must lead to a sewer; the unit needs a 230 V supply and a dry spot on a level base. The sludge content of the raw water determines how often the filter is flushed. Have the installation and commissioning carried out by a qualified contractor.

Technical data

CodeIVA.614.DS5
ManufacturerIVAR
TypeIVAR.DESAND 140-5
Dimensions (W × D × H)365 × 365 × 1861 mm
Hydraulic connection (inlet/outlet)5/4″
Indicative operating flow8.4 m³/h
Max. operating pressure6 bar
Treated water temperature5–35 °C
Power supply230 V
Drain connection3/4″, male thread
Control unitWSTC

Frequently asked questions

Does the IVAR.DESAND 140-5 filter need salt to regenerate?
No, according to the manufacturer it regenerates with water only. It therefore needs a reliable connection to the drain.

What is the maximum temperature of the treated water?
The operating water temperature is 5 to 35 °C and the maximum operating pressure is 6 bar.

Additional parameters

Category: column filters
Warranty: 2 years
Code: IVA.614.DS5
Manufacturer: IVAR
Type: IVAR.DESAND 140-5
Dimensions (W × D × H): 365 × 365 × 1861 mm
Hydraulic connection (inlet/outlet): 5/4″
Indicative operating flow: 8.4 m³/h
Max. operating pressure: 6 bar
Treated water temperature: 5–35 °C
Power supply: 230 V
Drain connection: 3/4″, male thread
Control unit: WSTC

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.