Two-way zone valve SELTRON BVQ DN 32 Rp 1 1/4" with AQD actuator 230 V, Kvs 100 – IVAR.TER-SELT
Code: 10.01.11.1007Product detailed description
IVAR.TER-SELT DN 32 consists of a two-way ball valve SELTRON BVQ with internal thread Rp 1 1/4" and a mounted servomotor AQD. The assembly is used for on/off zone control and as a shut-off element in heating, ventilation and air conditioning (HVAC), in cooling and in hot water distribution; it is also suitable for use in industry and agriculture.
Servomotor AQD
- supply voltage 230 V~, two-point ON/OFF control
- torque 5 Nm, rotation by 90° in 13 s
- power consumption 5 W, less than 0.25 W in standby mode
- manual mode button disconnects the motor and the valve is adjusted by a rotating controller; current position is indicated on the actuator
- direction of opening is changed by a switch hidden under the rotating controller
- the actuator is mounted on the valve by pressing with one hand without tools, a locking mechanism prevents unintentional release
- protection class IP42, protection class II according to EN 60730-1, cable length 1 m, housing made of PC thermoplastic
Valve BVQ DN 32
- connection by internal thread Rp 1 1/4", construction length 86.3 mm
- flow coefficient Kvs 100 m³/h
- shaft protected against withdrawal and sealed by three O-rings
- temperature of working fluid 10 to 90 °C
The actuator has been tested for 100,000 cycles, operates quietly and thanks to its compact design it can be installed even where several actuators are placed close to each other. The ambient temperature range is 0 to +55 °C at humidity up to 85 % without condensation. Installation and electrical connection must be carried out only by a qualified person.
The IVAR.TER-SELT range includes two-way zone valves DN 25 to DN 50 and three-way switching valves.
Technical parameters
| Code | 10.01.11.1007 |
| Manufacturer | SELTRON |
| Type | IVAR.TER-SELT |
| Finishing | two-way ball valve BVQ with servomotor AQD |
| Rated diameter | DN 32 |
| Connection | internal thread Rp 1 1/4" |
| Kvs | 100 m³/h |
| Valve construction length | 86.3 mm |
| Supply voltage | 230 V~ |
| Control signal | two-point ON/OFF |
| Torque | 5 Nm |
| Switching time | 13 s / 90° |
| Power consumption | 5 W (standby < 0.25 W) |
| Fluid temperature | 10–90 °C |
| Protection class | IP42 |
Frequently asked questions
What is the two-way zone valve BVQ DN 32 with actuator AQD used for?
For on/off zone control and as a shut-off element in heating, cooling, air conditioning and hot water preparation. It is also suitable for industrial and agricultural distribution systems.
Can the valve be operated manually?
Yes. After pressing the manual mode button, the motor is disconnected and the valve is adjusted by a rotating controller; pressing again cancels the manual mode.
Is any tool required to mount the actuator on the valve?
No, the actuator is mounted on the valve body by pressing with one hand and secured by a locking mechanism. It can be easily removed during disassembly.
At what fluid temperature can the valve operate?
The temperature of the working fluid can be 10 to 90 °C. The actuator can withstand ambient temperatures of 0 to +55 °C at humidity up to 85 % without condensation.
Additional parameters
| Category: | two-way valves with actuator |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | 10.01.11.1007 |
| Manufacturer: | SELTRON |
| Type: | IVAR.TER-SELT |
| Design: | 2-way BVQ ball valve with AQD actuator |
| Nominal diameter: | DN 32 |
| Connection: | female thread Rp 1 1/4" |
| Kvs: | 100 m³/h |
| Valve length: | 86.3 mm |
| Supply voltage: | 230 V~ |
| Control signal: | 2-point ON/OFF |
| Torque: | 5 Nm |
| Running time: | 13 s / 90° |
| Power consumption: | 5 W (standby < 0.25 W) |
| Fluid temperature: | 10–90 °C |
| Protection rating: | IP42 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!