Water treatment unit with reverse osmosis and five-stage filtration IVAR.ESTELLE 600

Code: 5113590041
Not rated Rating details
755,22 € –20 %
Úpravňa vody s reverznou osmózou a päťstupňovou filtráciou IVAR.ESTELLE 600
755,22 € –20 % 604,18 € / pcs 491,20 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

The IVAR.ESTELLE 600 unit cleans water in five stages: a 5 μm sediment filter, a pressed activated-carbon block, a 600 GPD reverse-osmosis membrane, a second carbon block and a mineralising cartridge. It has an integrated pump and, according to the manufacturer, removes up to 99.8 % of harmful substances. According to the data sheet it produces about 12 l of treated water per hour and mineralises it after osmosis.

Technical data

  • Dimensions (W × D × H): 160 × 450 × 400 mm
  • Weight: 8 kg
  • Treated water output: 12 l/h
  • Number of filtration stages: 5
  • Reverse-osmosis membrane: 600 GPD
  • Power consumption: 35 W
  • Power supply: 230 V, 50 Hz
  • Hydraulic connection (inlet/outlet): 3/8″
  • Inlet pressure: 1–5 bar

The unit connects to a gravity drain and a standard 230 V socket. An installation kit, connecting hose and assembly key are included. Have the installation and commissioning carried out by a qualified contractor.

Technical data

Code5113590041
ManufacturerIVAR
TypeIVAR.ESTELLE 600
Dimensions (W × D × H)160 × 450 × 400 mm
Weight8 kg
Treated water output12 l/h
Number of filtration stages5
Reverse-osmosis membrane600 GPD
Power consumption35 W
Power supply230 V, 50 Hz
Hydraulic connection (inlet/outlet)3/8″
Inlet pressure1–5 bar

Frequently asked questions

What requirements does the feed water have to meet?
Inlet pressure should be 1–5 bar, temperature 5–35 °C, pH 6.5–9.5 and residual chlorine below 0.3 mg/l. If the values do not match, the manufacturer advises contacting its technical department.

What has to be connected to the unit?
The water supply (3/8″ connection), a gravity drain and a 230 V socket within reach of the connecting cables.

Additional parameters

Category: UV lamps and reverse osmosis systems
Warranty: 2 years
Weight: 8 kg
Code: 5113590041
Manufacturer: IVAR
Type: IVAR.ESTELLE 600
Dimensions (W × D × H): 160 × 450 × 400 mm
Weight: 8 kg
Treated water output: 12 l/h
Number of filtration stages: 5
Reverse-osmosis membrane: 600 GPD
Power consumption: 35 W
Power supply: 230 V, 50 Hz
Hydraulic connection (inlet/outlet): 3/8″
Inlet pressure: 1–5 bar

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.