Vaillant raised 40 cm mounting base for snow-rich areas
Code: 0010027984Related products
Product detailed description
Vaillant – Elevated 40 cm mounting base for snow-rich areas
The original mounting base (sockelerhöhung) from Vaillant, which raises the outdoor unit of the aroTHERM heat pump by 40 cm above ground level. This solution is primarily intended for locations with high snow cover, where installation at standard height could result in the intake grid of the evaporator being buried in snow, thus limiting or completely stopping air flow through the unit.
Why elevation is important
Outdoor heat pump units draw in a large volume of air through the front or side grid of the evaporator. If snow drifts or accumulates up to the level of the grid, it results in a significant reduction in performance, increased electricity consumption for defrosting, and in extreme cases, the unit may shut down due to the safety cut-off for insufficient air flow. Elevation by 40 cm significantly reduces this risk in areas with regular to higher snowfall and also simplifies winter maintenance (clearing snow) around the unit.
Additional benefits of elevated installation
- Reduced risk of flooding/wetting of the unit during snow melting or heavy rain
- Better protection against mechanical damage during mowing, snow clearing, or regular garden maintenance
- More convenient access for service tasks and cleaning of the heat exchanger
- Integrated damping elements reduce the transmission of structural noise to the base, just like with standard bases
Technical specifications
- Height of elevation: 400 mm (40 cm)
- Overall frame dimensions: width approx. 1100 mm, depth approx. 450 mm
- Weight: approx. 29.25 kg
- Surface treatment: silver (light gray) coating, aesthetically matching with the white/light design of aroTHERM plus and aroTHERM Split units; a dark version is available for darker (anthracite) units (see our product "Anthracite – for gray units")
- Integrated rubber damping feet in contact with the ground
Compatibility with models
Suitable for: VWL 35/6 A, VWL 55/6 A, VWL 75/6 A, VWL 105/6 A, VWL 125/6 A, VWL 35/5 AS, VWL 55/5 AS, VWL 75/5 AS, VWL 105/5 AS, VWL 125/5 AS, VWL 55/3, VWL 85/3, VWL 115/2.
Installation
The base is anchored to a solid, level, and drained base (ideally a concrete slab or a compacted gravel base with drainage). Due to the weight of the frame and the unit itself (together it can exceed 150–200 kg), it is necessary to verify the load-bearing capacity of the base before installation. The unit itself is mounted and fastened on the frame exclusively by a qualified service company according to the Vaillant installation instructions, including the connection of pipe runs with sufficient slack/flexibility taking into account the elevated position of the unit.
Common questions
Is 40 cm elevation sufficient for mountainous areas with extreme snowfall? For regular and increased snowfall areas, this height is usually sufficient in most cases; for extreme locations, we recommend consulting with the installation company about additional measures (e.g., a snow guard roof, additional snow removal).
Can the base be used without the need to address snow, just to elevate the unit above the ground? Yes, the solution is suitable in general for areas with a risk of wetting or for aesthetic/service reasons.
Is a separate concrete foundation required? A solid and drained base is recommended; in unstable terrain, a concrete foundation matching the weight of the assembly is suitable.
Operational and service recommendations
Before the start of the winter season, we recommend checking the free space under the unit (to prevent the accumulation of leaves, branches, or other dirt that could restrict air flow) and the condition of the drainage under the base. In locations with extremely high snowfall, we recommend checking during winter whether snow accumulates up to the level of the evaporator grid despite the elevated position of the unit.
Related accessories
We recommend combining the base with a mounting kit for bottom installation (0010027971), or with an extension part (0010027972), since the elevated position of the unit also changes the vertical connection of the pipe route with the ground. A color-matched version of this base is available for dark (anthracite) unit designs (8000035192).
Warranty and professional installation
The product is covered by a warranty period of 24 months. Due to the weight of the complete assembly (frame + unit, together approximately 150–200 kg), we strongly recommend having the load-bearing capacity of the base assessed and the installation entrusted to a certified service company.
Shipping
Due to its size and weight, the product is classified as an atypical shipment transported by courier pallet transport, with advance payment by bank transfer.
Snow protection – why it matters in Central European conditions
In the climatic conditions of Slovakia, especially in foothill and mountainous areas, sufficient clearance between the bottom edge of the outdoor unit and the ground is among the key factors for reliable year-round operation of the heat pump. A standard installation height (unit on low bases, approx. 10–15 cm above ground level) can be covered with snow up to the level of the evaporator intake grid during heavy snowfall over several days. The consequences are:
- Significant reduction in heating performance at a time when the need for heat is highest (frosty days with snow cover)
- Increased electricity consumption for compensatory defrosting cycles
- In extreme cases, shutdown of the unit by the safety cut-off for insufficient air flow, requiring manual snow removal around the unit
The elevated mounting base with a 40 cm lift systematically solves this problem already during installation, without the need for additional construction modifications or regular intensive snow removal. The investment in an elevated base usually pays off within the first or second heating season in areas with regular winter snow cover due to lower energy consumption for defrosting and lower risk of failure due to unit blockage.
Installation procedure step by step
- Prepare a solid, level, and drained base (concrete slab or compacted gravel base) dimensioned for the weight of the frame and the unit.
- Mount and fasten the frame of the elevated base, check its horizontal level in all directions.
- Mount the outdoor unit on the frame and fasten it according to the manufacturer's installation instructions.
- Adjust the mounting kit route (possibly with an extension part) to the elevated position of the unit.
- Connect the pipe runs, electrical installation, and condensate drain.
- Verify free air circulation under the unit and put the unit into operation.
Additional parameters
| Category: | Heat Pump Accessories |
|---|---|
| Warranty: | 2 years |
| Weight: | 40 kg |
| Height of base: | 40 cm |
| Mounting base – height of base: | 40 cm |
| Mounting base – designation: | for snow-rich areas |
| Mounting base – type: | elevated |
| Mounting base – product code: | 0010027984 |
| Mounting base – manufacturer: | Vaillant |
| Mounting base – use: | insulation of heat pump |
| Mounting base – product type: | accessories/spare parts |
| Mounting base – product name: | Raised base for aroTHERM |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
About the company
The Vaillant Group is synonymous with heating and hot water preparation, placing particular emphasis on quality, reliability and user comfort. Its heating technology products are present in more than 100 countries around the world. The group unites the brands Vaillant, Saunier Duval, AWB, Bulex, DemirDöküm, Glow worm, Hermann Saunier Duval and Protherm. Each of these brands has extensive experience in the production of heating equipment, as most of them have been active in this segment for more than 80 years. With its 140 years of market presence, the brand Vaillant is among the largest and most significant. It has long been a market leader and a pioneer in the development and innovation of heating technologies in Europe. The Vaillant Group has an extensive network of sales representatives and thousands of satisfied customers around the world.
The extensive portfolio of the Vaillant Group includes modern heating technologies that are energy-saving, efficient and contribute to environmental protection. Thanks to a wide range of products and models, every customer can find exactly what they need here. The range includes wall-hung and floor-standing boilers, hot water storage tanks or electrical appliances. In the market of wall-hung boilers, the company is even number one in Europe with a 26 percent market share. The Vaillant Group is not specialized only in the development and production of boilers; its product portfolio also includes technologies that use renewable energy sources, such as solar systems or the most modern heat pumps and air conditioners. It also offers recovery or cogeneration units or zeolite heat pumps to users.
Vaillant Group thinks ahead every day and offers individual solutions for every need and type of energy. Its success is also based on research and development, which always takes place in line with the wishes of customers. The company's research and development department is among the largest and above all the most creative departments in this segment. The team of developers is constantly working on new devices and technological systems that are increasingly easy to operate and already meet the demands of tomorrow. Whether it is about energy solutions of the future or about the best way to use fossil fuels, the company Vaillant Group tries to anticipate new trends and to be always one step ahead of others. Proof of this is the registration of up to 100 new patents every year. In the field of production, the company places the greatest emphasis on achieving the highest quality of boilers, which represents perfection in every detail.
The Vaillant Group has its presence in most countries of the world. Slovakia is no exception, where the company Vaillant Group Slovakia, s. r. o. is located, representing the brands Vaillant and Protherm. Heating equipment of the Vaillant Group is produced in seven production plants, two of which are located on our territory. These factories employ more than 1,300 people in total. The production plant Protherm Production with its headquarters in Skalice specializes in the production of electric and floor-standing boilers for all brands belonging to the Vaillant Group. It can also boast its own research and development center, which is among the most modern in Europe. The second production plant in Slovakia is Vaillant Industrial Slovakia in Trenčianske Stankovce, which produces modules for wall-hung boilers for the entire group.
History of the company Vaillant
The history of the company Vaillant goes back to the year 1874, when it was founded by Johann Vaillant in Remscheid, Germany. Since then, the company Vaillant has been a leader in the field of heating and ventilation technologies.
History of the company Vaillant
1874 Plumber Johann Vaillant founded the company.
1894 Patented for the invention of a gas water heater with a "closed system" design.
1899 Registered company logo, the Easter Bunny.
1905 Development of a wall-mounted water heater, patented under the designation "Geyser".
1924 Development of a wall-mounted boiler for heating.
1955 Production of the millionth appliance after the end of the Second World War.
1960 Production of electrical appliances begins.
1967 Development of a combined wall-mounted boiler.
1974 11 million appliances sold since 1974.
1992 Establishment of subsidiary companies – in the Czechoslovak Republic, Hungary, Poland and Turkey.
1993 Separation of Czechoslovakia leads to the creation of a separate sales representation in Slovakia.
1999 Anniversary, 125th anniversary of the founding of the company, 40 million appliances sold in the entire history of the company.
2001 The Vaillant Group is formed, covering eight significant manufacturers of heating equipment in Europe, including the boiler manufacturer Protherm in Slovakia.
2003 The Vaillant Group production plant in Skalice specializes in the production of floor-standing boilers also for other brands belonging to the VG group.
2004 Vaillant Group opens a new production plant in Trenčín, Slovakia, for the production of hydraulic groups for wall-hung boilers.
2009 10,000,000 modules for heating equipment produced at the VG Trenčín plant.
Easter Bunny in the logo - intended for the success of the company
Pink dwarfs and cute animals stand around and admire the miracle of the egg. Johann Vaillant is fascinated by the scene and decides to buy both the picture and the copyright. For Vaillant, this means the establishment of its brand and an extremely successful story.
Very distinctive brand profile
Since 1899, the motif has adorned all products, catalogs and brochures. In a few short years, Vaillant built an excellent reputation that spread throughout Germany and even beyond its borders. Vaillant gave its logo clear lines and outlines. "The Bunny in the Egg" remains the central theme, but the word "Vaillant" is added.
Many Germans know that the Vaillant Bunny belongs to a company based in North Rhine-Westphalia. Moreover: more than 70% of all Germans have heard of the company Vaillant. In Austria and the Netherlands, the company achieves similar results for its image.
Sustainability
As a forward-looking, family-owned company, we accept special responsibility for the environment, for our employees and for society. We are convinced that economic success, sustainable and profitable growth are inseparably linked to a commitment to social and ecological standards.
In order to fulfill this commitment, we are committed to carrying out our activities in a sustainable manner within the strategic S.E.E.D.S. Program (Sustainability in Environment, Employees, Development & Products and Society). The definition of these areas of interest is based on a comprehensive understanding of sustainability, in which we also take into account key issues of our core activities.
