Water pressure reducing valve 3/4", adjustable output 1 - 5 bar

Product detailed description

This pressure reducing valve has a size of 3/4 inch and is used in water supply systems in buildings. When the pressure in the network is too high or fluctuating, the valve stabilizes it behind itself to a lower, pre-set value. This protects the installation and connected appliances. The output pressure can be adjusted in the range of 1 - 5 bar and the input pressure must not exceed 10 bar.

Main Features

• size 3/4 inch, one step larger than the 1/2 inch version
• output pressure adjustable from 1 to 5 bar
• input pressure maximum 10 bar
• operating temperature maximum 80 °C
• brass with elements of stainless steel

Technical Data

Application and Installation

The 3/4 inch valve is suitable where the water supply system in the building requires reduced and stable water pressure. We recommend installing it after the main shut-off valve and before further branches. Ideally, install a filter before it to prevent mechanical impurities from damaging its interior. After setting, check the actual output pressure with a pressure gauge and let an expert handle the installation.

Frequently Asked Questions

What size is this pressure reducing valve?

It has a size of 3/4 inch. If you need a smaller dimension, the 1/2 inch version with the same parameters is also available.

What output pressure can be adjusted?

The output pressure is adjustable in the range of 1 - 5 bar.

What is the maximum input pressure the valve can withstand?

The input pressure can be up to 10 bar.