Water purifier with reverse osmosis IVAR.CROSS MAX – four-stage, without tank, direct flow 2 l/min – SPECIAL OFFER
Code: ESMO2800PECOProduct detailed description
Powerful reverse osmosis even in a narrow cabinet
IVAR.CROSS MAX is a drinking water purifier that, thanks to its compact design without a tank, fits even into tight spaces under the sink. Water first passes through a polypropylene pre-filter with activated carbon, which captures sediments and reduces chlorine content, and then through an 800 GPD reverse osmosis membrane. This removes up to 99% of impurities including viruses, bacteria and heavy metals and reduces PFAS content; the activated carbon also improves the taste and smell of the water. The direct flow rate is up to 2 l/min (120 l/h).
Equipment
- regeneration 67% – water saving up to 67%
- automatic membrane flushing
- display with fault indication and remaining capacity of the cartridges – after every 600 l one segment goes out, before the end of life a red indicator lights up and an acoustic signal sounds
- water leak detector
- dry cartridge replacement in 5 minutes
Packaging and installation
It is delivered with installed filter cartridges, a connection kit, a tap for purified water, a water leak detector and a power adapter. The connection is 1/2" and 3/8" threaded, the power supply is 230 V / 50 Hz. The incoming water must have a pressure of 1–4 bar (a pressure reducing valve is required before the purifier) and a temperature of +5 to +30 °C. The capacity of the cartridges is up to 2000 l depending on the water quality; the replacement pre-filter has the code ESCPVCBDFRO, the membrane ESCSVPDRO800. A mineralizing post-filter IVAR.MFV (ESPD2010ECO) can be added to the output.
Technical parameters
| Code | ESMO2800PECO |
| Brand | IVAR |
| Type | IVAR.CROSS MAX |
| System | four-stage reverse osmosis without a tank |
| Direct flow | 2 l/min (120 l/h) |
| Membrane | RO 800 GPD |
| Regeneration (water saving) | 67 % |
| Capacity | up to 2000 l (cartridges) |
| Incoming water pressure | 1–4 bar |
| Incoming water temperature | +5 to +30 °C |
| Connection | 1/2", 3/8" threaded |
| Power supply | 230 V, 50 Hz |
| Dimensions (h × w × d) | 304 × 198 × 191 mm |
| Weight | 6 kg |
| Replacement cartridges | ESCPVCBDFRO, ESCSVPDRO800 |
Frequently asked questions
When should the cartridges in IVAR.CROSS MAX be replaced?
The cartridges have a capacity of up to 2000 l of purified water, less in poorer water quality. The indicator on the display decreases after 600 l, before the end of life it turns red and an acoustic signal sounds; after replacement it is reset by pressing the Restart button.
Does the purifier need a water tank?
No, CROSS MAX is a direct-flow purifier without a tank, so it also fits into narrow cabinets under the sink. It delivers purified water at a flow rate of up to 2 l/min.
What is included in the packaging?
The purifier with filter cartridges, connection kit, tap for purified water, water leak detector, power adapter and installation and use instructions.
Additional parameters
| Category: | UV lamps and reverse osmosis systems |
|---|---|
| Warranty: | 2 years |
| Weight: | 6 kg |
| Availability: | In stock or at supplier |
| Code: | ESMO2800PECO |
| Brand: | IVAR |
| Type: | IVAR.CROSS MAX |
| System: | four-stage tankless reverse osmosis |
| Direct flow: | 2 l/min (120 l/h) |
| Membrane: | RO 800 GPD |
| Recovery (water saving): | 67 % |
| Capacity: | up to 2000 l (cartridges) |
| Inlet water pressure: | 1–4 bar |
| Inlet water temperature: | +5 to +30 °C |
| Connection: | 1/2", 3/8" threaded |
| Power supply: | 230 V, 50 Hz |
| Dimensions (H × W × D): | 304 × 198 × 191 mm |
| Weight: | 6 kg |
| Replacement cartridges: | ESCPVCBDFRO, ESCSVPDRO800 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.