Water Softener Filter IVAR.DEVAP TWIN 045 with Two Pressure Vessels for Continuous Operation – 1" Connection
Code: IVA.804.DV-DUPLEXProduct detailed description
The main advantage of the IVAR.DEVAP TWIN 045 device is continuous operation: two pressure vessels alternate, so softened water flows even during regeneration and no technological break occurs. The water softener is intended for potable water treatment and is also suitable for heating and technological water, meeting the requirements for permanent contact with potable water.
Control
The TWIN version has one programmable electronic control unit and a switching valve that alternates individual pressure vessels. The device includes a brine tank with a brine line and the water hardness at the output can be adjusted.
Data for IVAR.DEVAP TWIN 045
- dimensions of the unit w × d × h: 780 × 240 × 1415 mm, brine tank Ø 516 × 950 mm
- inlet/outlet connection 1", waste 3/4" external thread
- operational flow approximately 2.7 m³/h, cyclic capacity 2 × 220 m³·°f
- max. pressure 6 bar, water temperature 5 – 35 °C, ambient temperature 5 – 40 °C
Installation and operation
To smoothly adjust the output hardness, an external bypass valve is installed on the bypass, for example a gate valve or an adjusting ball valve IVAR.TOP BALL. The device requires a flat, load-bearing floor, a drain with sufficient capacity, a 230 V socket, and a pressure of at least 3 bar at a minimum flow of 2 m³/h for 20 – 30 minutes. The brine tank is filled with tablet regeneration salt for water softeners (code 410.600.44CS), its consumption depends on the water hardness. Installation and electrical connection are performed by a qualified person.
Technical parameters
| Code | IVA.804.DV-DUPLEX |
| Brand | IVAR |
| Type | IVAR.DEVAP TWIN 045 |
| Design | water softener with two pressure vessels, continuous operation |
| Application | potable water, also heating and technological |
| Control unit | 1 unit + switching valve |
| Inlet/outlet connection | 1" |
| Waste connection | 3/4" external thread |
| Operational flow | 2.7 m³/h (approximately) |
| Cyclic capacity | 2 × 220 m³·°f |
| Dimensions w × d × h | 780 × 240 × 1415 mm |
| Dimensions of brine tank | Ø 516 × 950 mm |
| Max. operating pressure | 6 bar |
| Regeneration salt | tablet, code 410.600.44CS |
Frequently asked questions
Does the water softener supply softened water even during regeneration?
Yes, two pressure vessels alternate, so the device operates non-stop without a technological break for regeneration.
What is the difference between TWIN and DUPLEX versions?
TWIN 030 – 110 has one control unit with a switching valve, DUPLEX 140 – 500 has two control units and an external three-way valve. IVAR.DEVAP TWIN 045 belongs to the TWIN 030 – 110 series.
How is the output hardness adjusted?
Using an external bypass valve on the bypass, for example a gate valve or an adjusting ball valve IVAR.TOP BALL, which must be added during installation.
How much space does the device need?
The IVAR.DEVAP TWIN 045 unit has dimensions 780 × 240 × 1415 mm and the brine tank Ø 516 × 950 mm. At least 200 mm must be left above the device and space for connection.
Additional parameters
| Category: | softening filters |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | IVA.804.DV-DUPLEX |
| Brand: | IVAR |
| Type: | IVAR.DEVAP TWIN 045 |
| Design: | softener with two pressure vessels, continuous operation |
| Application: | drinking water, also heating and process water |
| Control unit: | 1 unit + changeover valve |
| Inlet/outlet connection: | 1" |
| Drain connection: | 3/4" male thread |
| Operating flow: | 2.7 m³/h (indicative) |
| Cyclic capacity: | 2 × 220 m³·°f |
| Dimensions W × D × H: | 780 × 240 × 1415 mm |
| Brine tank dimensions: | Ø 516 × 950 mm |
| Max. operating pressure: | 6 bar |
| Regeneration salt: | tablets, code 410.600.44CS |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.