Water softener IVAR.DEVAP 200 with separate brine tank – WSCI control unit, 5/4" connection

Code: IVA.820.DV
Not rated Rating details
3 448,92 € / pcs 2 804 € excl. VAT Measure price:
International delivery
In stock at supplier

Detailed information

Product detailed description

IVAR.DEVAP 200 is a water softener with a pressure column and a separate salt tank. It is intended primarily for drinking water but is also suitable for treating heating and process water. The water hardness at the filter outlet can be adjusted and the unit meets the requirements for permanent contact with drinking water.

Data for size 200

  • column dimensions W × D × H: 416 × 416 × 1858 mm, brine tank Ø 723 × 1200 mm
  • inlet/outlet connection 5/4", drain 3/4" male thread
  • indicative operating flow 12 m³/h, cyclic capacity 960 m³·°f
  • max. operating pressure 6 bar, water temperature 5 – 35 °C

Control and salt

The electronic WSCI unit starts regeneration by time or by metered volume, and a mixing bypass is also included in the delivery. The brine tank is topped up with regeneration salt for water softeners (code 410.600.44CS); consumption depends on the total hardness of the water at the installation site. GEL.RESICLEAN is used for occasional cleaning of the resin; for size 200 the dose is 3000 ml.

Installation

The softener is placed in a dry room at 5 – 40 °C on a level floor, leaving at least 200 mm of free space above the column. A mechanical impurity filter (e.g. DEPURA 1000 PP) is installed upstream, and the installation includes shut-off valves, pressure gauges, sampling valves and a bypass for the whole treatment system and for the filter itself. A drain of sufficient capacity and a 230 V socket are required.

Technical data

CodeIVA.820.DV
BrandIVAR
TypeIVAR.DEVAP 200
Designcolumn softener with separate brine tank
Applicationdrinking water, also heating and process water
Control unitWSCI, by time or volume
Inlet/outlet connection5/4"
Drain connection3/4" male thread
Operating flow12 m³/h (indicative)
Cyclic capacity960 m³·°f
Dimensions W × D × H416 × 416 × 1858 mm
Brine tank dimensionsØ 723 × 1200 mm
Max. operating pressure6 bar
Water temperature5 – 35 °C
Regeneration saltcode 410.600.44CS

Frequently asked questions

What water is the softener intended for?
Primarily for drinking water, but it can also be used for heating and process water. The unit meets the requirements for permanent contact with drinking water.

Can the final water hardness be adjusted?
Yes, the water hardness at the filter outlet is adjustable. A mixing bypass is also included in the delivery.

How much RESICLEAN is needed to clean the resin?
For IVAR.DEVAP 200 the dose is 3000 ml. Cleaning is recommended at least once a year, more often with poorer raw water.

What needs to be provided during installation?
A mechanical filter upstream of the softener, shut-off valves, pressure gauges, sampling valves and a bypass, plus a drain of sufficient capacity and a 230 V socket. The brine tank Ø 723 × 1200 mm is a separate vessel and needs its own space.

Additional parameters

Category: softening filters
Warranty: 2 years
Code: IVA.820.DV
Brand: IVAR
Type: IVAR.DEVAP 200
Design: column softener with separate brine tank
Application: drinking water, also heating and process water
Control unit: WSCI, by time or volume
Inlet/outlet connection: 5/4"
Drain connection: 3/4" male thread
Operating flow: 12 m³/h (indicative)
Cyclic capacity: 960 m³·°f
Dimensions W × D × H: 416 × 416 × 1858 mm
Brine tank dimensions: Ø 723 × 1200 mm
Max. operating pressure: 6 bar
Water temperature: 5 – 35 °C
Regeneration salt: code 410.600.44CS

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.