Zostava GeniaAir Classic HA 11-7.1 + GeniaSet + Mipro Sense
Code: 8000057757Related products
Product detailed description
The Protherm GeniaAir Classic HA 11-7.1 + GeniaSet + MiPro Sense set is a complete heating and domestic hot water system based on an air-to-water heat pump. The set combines the outdoor unit of the GeniaAir Classic heat pump in the 11 kW power class, the indoor hydraulic unit GeniaSet, and the room controller MiPro Sense, which is used to operate and adjust the entire system.
The outdoor unit GeniaAir Classic operates with the natural refrigerant R290 with a low global warming potential. The outdoor and indoor units are connected directly via heating water or an antifreeze mixture using a separating heat exchanger - there is therefore no refrigerant piping between the units, which simplifies installation and reduces the requirements for working with refrigerant during installation.
According to the manufacturer, the GeniaAir Classic series is suitable for heating with an output temperature of heating water up to 70 °C without the need for a backup source, which makes it suitable not only for new buildings with floor heating, but also for existing buildings with conventional radiators. The unit is capable of reliable operation even at outdoor temperatures down to -25 °C.
Technical specifications
| Parameter | Value |
|---|---|
| Product code | 8000057757 |
| Refrigerant | R290 |
| COP (A7/W35) | 5.1 |
| Maximum output temperature of heating water | 70 °C |
| Minimum operating outdoor temperature | -25 °C |
| Power range of the GeniaAir Classic series | 5 - 11 kW |
Installation and compatibility
The set includes the outdoor unit of the heat pump GeniaAir Classic, the indoor hydraulic unit GeniaSet, and the room controller MiPro Sense, which are designed as a mutually compatible unit. The outdoor unit is placed outside the building, the indoor hydraulic unit GeniaSet is installed inside the building and connected to the heating system.
Thanks to the patented Flexible Space Function, the manufacturer states that the safety distances usually required for heat pumps with refrigerant R290 are significantly reduced for the GeniaAir Classic, so the unit can be placed closer to windows, doors, basement windows or outdoor sockets.
The GeniaAir Classic series is available in the same configuration with GeniaSet and MiPro Sense in the power classes 5 and 7 kW, so it is possible to choose a variant according to the thermal loss of a particular building.
Recommended accessories
Additional parameters
| Category: | GeniaAir / GeniaSet (Protherm) |
|---|---|
| Warranty: | 2 years |
| Weight: | 95 kg |
| Refrigerant: | R290 |
| Product code: | 8000057757 |
| COP (A7/W35): | 5.1 |
| Maximum output temperature of heating water: | 70 °C |
| Minimum operating outside temperature: | -25 °C |
| Power range of GeniaAir Classic series: | 5 - 11 kW |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
About the company
The company Protherm Production is part of the Vaillant Group and is a manufacturer of heating technology for many countries in Europe, Asia and Africa. For the Slovak market, it produces boilers of the Vaillant and Protherm brands. Protherm Production is not only a production plant. It also includes one of the most modern research and development centres, a testing centre and a distribution and logistics centre for Central and Eastern Europe.
The company's beginnings date back to 1991, when it operated as a seller of heating technology in Prague. Production in Skalica was initially launched in the company Didaktik, from where it was moved to the premises of the current plant in 1999. Since 2001, it has been part of the German Vaillant Group.
Three Slovak entities: The Vaillant Group employs more than 1,800 people in Slovakia. In addition to the plant in Skalica, it also owns the company Vaillant Industrial Slovakia in Trenčianske Stankovce, which produces hydraulic modules and pipes. The sales organisation for the Slovak market is the company Vaillant Group Slovakia, which also ensures further customer care and servicing of the products offered.
The Vaillant Group has a history of over 140 years and more than 2,000 patents. It is a leader and pioneer in the field of heating technologies in Europe. It has 10 production plants worldwide (eight in Europe, one in Turkey and one in China) and more than 12,000 employees. It produces equipment under the brands Vaillant, Protherm, Saunier Duval, Bulex, AWB, DemirDöküm, Glow-Worm and Hermann.
Milestones in Protherm Production 2017 – Record: half a million products produced in 2017
2016 – Opening of the new visitor centre
2015 – Opening of the new testing centre
2013 – Creation of the central logistics warehouse East Hub
2011 – Launch of production of suspended non-condensing boilers
2005 – Specialisation in all stationary boilers
2001 – Integration into the German Vaillant Group
2000 – Start of production with three assembly lines
Production
Protherm Production produces a wide range of boilers and hot water heating equipment. These include suspended and stationary, condensing and non-condensing boilers, electric boilers, electric water heaters for hot water preparation and indoor units of heat pumps. Products of the following brands are produced at the plant in Skalica:
The most modern electronic work processes are used in Protherm Production, which makes it relatively easy to assemble heating equipment on the production lines. The work process on LCD screens guides employees through the entire assembly process, in both text and visual form. This intelligent electronic system makes production easier and helps avoid errors. In the case of incorrect use of components, it alerts us and stops the assembly of the product on the line.
The production halls of the plant in Skalica are bright, clean and quiet spaces. The goal of Protherm Production is to become a green production facility, so it invests significant financial resources into ecological solutions, innovations and focuses on energy saving.
Research and development centre
One of the most modern research and development centres in Europe is part of Protherm Production. The company can boast of a top-class research and development centre with powerful workstations, a modern laboratory and high-quality equipment. Members of the development team primarily contribute to innovations in current boilers and the introduction of new, more powerful modules. Ideas for new, more efficient products are born here, the design is optimised to improve quality while maintaining or reducing the price, taking into account new technologies and their implementation. In addition, existing boilers are further refined within the entire Vaillant group.
The main tasks of the research and development centre of the Protherm Production plant are the development of hydraulic modules for boilers, gas condensing and non-condensing boilers and electric boilers. We also find here the team of sustainable engineering (Sustaining Engineering) and the team of project and product management. The final form of the product is created thanks to the close cooperation of the development staff of the Protherm Production company with the developers from other companies in the group.
Recently, new departments have also been created within the research and development centre. One of them is the Intellectual Property Department, whose task is to register new patents. We have also expanded the group of simulation engineers, who are experts in CAE simulations.
The research and development centre currently has 63 employees. It also includes an expanded prototype workshop and a modern testing centre. What our developers design is assembled in the prototype workshop, tested in the laboratory and finally introduced into mass production.
