Zostava GeniaAir Split HA 7-8.2 + hydr. modul + Mipro Sense

Product detailed description

GeniaAir Split HA 7-8.2 + hydraulic module + Mipro Sense set is a complete air-source heat pump set from Protherm GeniaAir in the "Split" configuration (outdoor and indoor unit), built on a common technological platform of the Vaillant Group – the same one used for the Vaillant aroTHERM Split series. The outdoor unit HA 7-8.2 operates with refrigerant R32 and in this configuration achieves an energy efficiency class of A+++ for low-temperature heating (floor heating, or oversized radiators).

Technical parameters

• Power range in heating mode: 7.1 / 10.9 kW (rated / maximum power, approximately under standard reference conditions A7/W35 according to EN 14511)
• Refrigerant: R32 – a more modern refrigerant with a lower global warming potential (GWP) compared to older refrigerants such as R410a, which is why R410a is gradually being replaced by R32 in the newer HA-8.2 series.
• Energy efficiency class: A+++ (ErP, low-temperature application)
• Configuration: Split – outdoor unit connected by refrigerant piping to the indoor unit
• Indoor unit: standalone hydraulic module
• Control: room control panel Mipro Sense
• Approximate weight of the set: approx. 123 kg (sum of the outdoor and indoor unit, exact weight depends on the specific packaging configuration)
• Power supply: 230 V or 400 V according to the power class (further connection parameters should be consulted when ordering)

What is included in the set

The GeniaAir Split HA 7-8.2 + hydraulic module + Mipro Sense set includes the outdoor unit HA 7-8.2 and is supplemented by a standalone hydraulic module, which ensures the connection of the refrigerant circuit of the outdoor unit with the heating system of the house (circulation pump, expansion tank, safety valve, electric booster). A hot water storage tank is not part of this set and must be added separately according to the household's needs. The set also includes the room controller Mipro Sense for comfortable setting and monitoring of operation directly from the living space. The refrigerant piping connecting the outdoor and indoor unit, its insulation, and optionally an internet gateway for remote control via a mobile app must be added separately according to the length of the route and the customer's requirements.

Why the GeniaAir split heat pump

The split configuration has an advantage over the monoblock in that refrigerant does not flow through the indoor unit, only heating (and optionally hot water) – thus eliminating the risk of freezing water in the outdoor part of the circuit at extremely low temperatures and also reducing the noise transmitted to the building structure, since the compressor is entirely located outdoors. The GeniaAir Split series is intended mainly for new constructions and renovations with a low-temperature heating system, where emphasis is placed on high seasonal efficiency (SCOP) and energy efficiency class A+++.

Installation and service

We recommend that the installation of the heat pump, connection of the refrigerant circuit, and commissioning be entrusted exclusively to an authorized Protherm service partner – only in this way is proper functionality and the right to an extended warranty after registration of the device with the manufacturer guaranteed. Before installation, it is necessary to verify the heat loss of the building and choose the correct size of the heating circuit (floor heating, or low-temperature radiators) so that the pump operates at an optimal operating point with the highest efficiency.

Placement and operation of the outdoor unit

We recommend placing the outdoor unit on a solid, flat, and sufficiently load-bearing base (concrete slab or consoles anchored to the façade) with anti-vibration pads that limit the transmission of vibration to the building structure. It is necessary to ensure free space for air intake and exhaust (according to the manufacturer's installation manual) and to drain condensate, which is mainly formed during the defrosting cycle at negative temperatures. When designing the placement, noise requirements must also be considered – especially when installing in close proximity to neighboring plots or residential areas, where the required distances according to the current noise legislation must be maintained.

The heat pump operates even at negative outdoor temperatures, but its performance and efficiency (COP) decrease with decreasing outdoor temperature – therefore, when designing the system, the so-called bivalent point is determined, i.e., the temperature below which (in most installations only a few days a year) an additional heat source may be required, usually an integrated electric heating element in the hydraulic module.

Compatible accessories

• Internet gateway for connection to a mobile app and remote control
• Hot water storage tank of suitable size (for sets without an integrated storage tank)
• Accumulation (balancing) tank for multi-zone systems or systems with low water flow
• Set for multi-zone heating regulation (e.g., combination of floor heating and radiators in different zones of the house)
• Anti-vibration and mounting consoles or base plate for the outdoor unit

Other frequently asked questions

Does the heat pump work in the frost? Yes, units of the GeniaAir series are designed for operation even at significantly negative outdoor temperatures. At low temperatures, automatic defrosting cycles of the outdoor heat exchanger and a slight decrease in performance and efficiency occur, which is a common feature of all air-source heat pumps.

Can the heat pump be used for cooling in summer? With a suitable heating system (especially floor heating with active or passive cooling), it is possible to use the cooling function in some configurations – the exact possibility and method of connection should be consulted with our technician when designing the system.

Frequently asked questions

What is the difference between the "split" and "monoblock" configurations? In the split system, the refrigerant circuit is divided between the outdoor and indoor units, which are connected by refrigerant piping. Inside the house, only heating (or optionally hot water) circulates through the hydraulic module, not refrigerant. In the monoblock configuration, the entire refrigerant circuit is enclosed in the outdoor unit and only heating water leads into the house – the installation is simpler and does not require work with refrigerant directly at the installation site.

Can this heat pump be used as the only heat source? Yes, with a proper energy design (heat loss of the building, low-temperature heating system – floor heating or larger radiators), this set is designed as a monovalent heat source for heating and hot water. Precise dimensioning is recommended to be verified with our technician according to the specific building.

Is a hot water storage tank required? In sets with GeniaSet, the storage tank is integrated directly in the indoor unit. In sets with a standalone hydraulic module (without GeniaSet), it is necessary to add a hot water storage tank separately – we are happy to advise you on the selection of the appropriate size.

How is the Mipro Sense controller operated? Mipro Sense is a room control panel with a touch display that allows setting of heating and cooling circuits, time programs, and monitoring of operation. The system is prepared for connection to an internet gateway for remote control via a mobile app (purchased separately if not part of the set).

What are the service and warranty requirements? We provide a standard legal warranty for the product, and we recommend an extended warranty to be handled by registering with the manufacturer after professional installation by an authorized Protherm service partner.