Automatic self-cleaning filter GEL.DEPURA AUTOMATIC – 6/4" F / 2" M, inlet from the left
Code: 101.007.10LProduct detailed description
The GEL.DEPURA AUTOMATIC, code 101.007.10L, captures sand, rust and other mechanical impurities from the water and takes care of its own cleaning. At the set interval a timer switches on the motor, rotating brushes clean the stainless steel filter cartridge, and water flowing through the open flush valve carries the trapped particles to the drain. The letter L at the end of the code means that water enters the filter from the left; the mirror version with inlet from the right has code 101.007.10P.
Cleaning settings
The flushing interval is set on the display with buttons between 1 and 30 days (factory setting 4 days) and the flushing time between 10 and 90 seconds (factory setting 20 s). The manufacturer recommends flushing every 4 days, and daily for water containing mud or clay. An immediate flush can also be started manually with a button.
Technical data
- connection 6/4" female thread – 2" male thread
- max. operating flow 7 m³/h, max. pressure 10 bar
- water temperature 5–40 °C, ambient 5–50 °C
- dimensions: height 480 mm, diameter 160 mm, three-piece design
- SAN bowl, polypropylene and brass head
- washable 95 µm stainless steel cartridge included
- approved for drinking water
Installation
The filter is installed directly after the water meter together with a bypass; if the system has an expansion vessel, always after it. A non-return valve is recommended after the water meter. Mains pressure should be 2–10 bar; at higher pressure a pressure reducing valve is required upstream of the filter. A 230 V socket within reach of the cable and a free drain of at least 40 mm diameter are needed (the technical data sheet specifies a sewer connection of DN 50 or larger). Connection, timer setting and user instruction must be carried out by a professional with electrical qualifications. Mounting wrench 125.210.50 is used to remove the bowl.
Technical data
| Code | 101.007.10L |
| Brand | IVAR |
| Type | GEL.DEPURA AUTOMATIC |
| Water inlet | from the left (L) |
| Connection | 6/4" F – 2" M |
| Max. operating flow | 7 m³/h |
| Max. pressure | 10 bar |
| Water / ambient temperature | 5–40 °C / 5–50 °C |
| Filter cartridge | stainless steel, 95 µm, washable |
| Flushing interval | 1–30 days |
| Flushing time | 10–90 s |
| Power supply | 230 V |
| Dimensions (height × Ø) | 480 × 160 mm |
| Materials | bowl SAN, head PP/brass |
Frequently asked questions
What does the letter L in code 101.007.10L mean?
It indicates the side from which water enters the filter – L means inlet from the left. The version with inlet from the right has code 101.007.10P.
What does the filter need at the installation site?
A 230 V socket within reach of the cable, a drain connection and a mains pressure of 2 to 10 bar. At higher pressure a pressure reducing valve must be fitted upstream of the filter.
How often does the filter flush?
The interval can be set from 1 to 30 days; the manufacturer recommends every 4 days, and daily for water with mud or clay. The flushing time can be chosen between 10 and 90 seconds.
Additional parameters
| Category: | Self-cleaning filters, manual and automatic |
|---|---|
| Warranty: | 2 years |
| Type: | water filter |
| Code: | 101.007.10L |
| Brand: | IVAR |
| Type: | GEL.DEPURA AUTOMATIC |
| Water inlet: | from the left (L) |
| Connection: | 6/4" F – 2" M |
| Max. operating flow: | 7 m³/h |
| Max. pressure: | 10 bar |
| Water / ambient temperature: | 5–40 °C / 5–50 °C |
| Filter cartridge: | stainless steel, 95 µm, washable |
| Flushing interval: | 1–30 days |
| Flushing time: | 10–90 s |
| Power supply: | 230 V |
| Dimensions (height × Ø): | 480 × 160 mm |
| Materials: | bowl SAN, head PP/brass |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.