Cup filter Ermetiq for inlet water, 3-stage, 5", 3/4" connection

Product detailed description

This cup filter from Ermetiq is designed for systems with a 3/4" connection and purifies water before it flows further into the installation. It retains sand, sediments, and other impurities, thus protecting the valves, appliances, and heating or plumbing circuits located downstream. The three-stage design uses multiple filtration stages in a single 5" body.

What the filter offers

• three filtration stages built into one cup body
• 3/4" connection, 5" body size
• carbon insert 5 µm, cotton insert 25 µm, and washable insert 50 µm
• mounting bracket and key included in the package
• maximum operating pressure of 10 bar
• operating temperature from 5 to 45 °C

Technical data

Installation and use

The filter should be installed at the water inlet to the building or before a device that needs protection from impurities. During installation, ensure that the specified pressure and temperature are not exceeded; the body is attached to the supplied bracket. Regularly check the inserts, and the washable insert can be rinsed. When selecting the filter, make sure the 3/4" connection matches your piping.

Frequently asked questions

What connection does this filter have?

The connection is 3/4", and the filter body has a size of 5".

Is the filter suitable for a hot circuit?

The operating temperature is 5–45 °C, so the filter is intended for water within this range and should not be used in hot circuits.

What inserts are included in the set?

Carbon 5 µm, cotton 25 µm, and washable 50 µm.