Decentralised heat recovery ventilation unit IVAR.ASPIRCOMFORT CLASS 620V – 620 m³/h, Wi-Fi, vertical
Code: IVAP20047WProduct detailed description
The IVAR.ASPIRCOMFORT CLASS 620V (code IVAP20047W) provides controlled air exchange in a single room without any ductwork. It is mounted vertically on the external wall and draws in and expels air through two openings of 200 mm diameter. It suits classrooms, offices and business premises: it removes moisture and odours and returns the heat from the extract air to the room.
Heat recovery and filtration
- two polypropylene counterflow plate heat exchangers, heat recovery efficiency 91.8% to EN 308 (86.1% to EN 13141-7)
- operation at outdoor temperatures down to -25 °C, frost protection
- pleated ePM1 70% filters with low pressure drop, dirty filter warning
- free cooling with motorised bypass damper
Fans and control
- EC centrifugal fans with forward-curved blades, 4 speeds, airflow 620 / 355 / 165 m³/h
- temperature, humidity and air quality sensors (VOC, CO2) for automatic speed control
- control via touch panel and Wi-Fi app
- power cable with Schuko plug, 230 V / 50 Hz
Supplied with 2 connectors and 2 fixed clamps Ø 200 mm, a PE insulation layer, an installation template and a wall bracket. The unit requires a condensate drain with a trap. Installation and electrical connection should be carried out by a qualified professional.
Technical data
| Code | IVAP20047W |
| Brand | IVAR |
| Type | IVAR.ASPIRCOMFORT CLASS 620V |
| Version | decentralised heat recovery ventilation unit |
| Mounting | vertical, on external wall |
| Airflow V3 / V2 / V1 | 620 / 355 / 165 m³/h |
| Heat recovery efficiency (EN 308 / EN 13141-7) | 91.8% / 86.1% |
| Filter class | ePM1 70% |
| Sound pressure at 3 m (V1 / V2 / V3) | 33 / 36 / 41 dB(A) |
| Control | touch panel, Wi-Fi app |
| Power supply | 230 V / 1 ph / 50 Hz |
| Power consumption | 340 W; 165 W at V3 and 15 Pa with clean filters |
| Air opening diameter | 200 mm |
| Dimensions (W × D × H) | 1033 × 413 × 954 mm |
| Weight | 70 kg |
Frequently asked questions
Does the unit need ductwork?
No. The unit is mounted directly on the room's external wall and connects to the outside through two openings of 200 mm diameter, so it can be used where a duct system cannot be installed.
What is included in the delivery?
Two connectors and two fixed clamps Ø 200 mm, a PE insulation layer, an installation template and a wall mounting bracket.
Does condensate have to be drained?
Yes. Condensate forms in the heat exchanger during heat recovery and must be drained via a trap to the sewer or outside; the drain connection has a diameter of 20 mm.
Additional parameters
| Category: | Decentralized ventilation units and accessories |
|---|---|
| Warranty: | 2 years |
| Weight: | 70 kg |
| Type: | control / sensor |
| Code: | IVAP20047W |
| Brand: | IVAR |
| Type: | IVAR.ASPIRCOMFORT CLASS 620V |
| Version: | decentralised heat recovery ventilation unit |
| Mounting: | vertical, on external wall |
| Airflow V3 / V2 / V1: | 620 / 355 / 165 m³/h |
| Heat recovery efficiency (EN 308 / EN 13141-7): | 91.8% / 86.1% |
| Filter class: | ePM1 70% |
| Sound pressure at 3 m (V1 / V2 / V3): | 33 / 36 / 41 dB(A) |
| Control: | touch panel, Wi-Fi app |
| Power supply: | 230 V / 1 ph / 50 Hz |
| Power consumption: | 340 W; 165 W at V3 and 15 Pa with clean filters |
| Air opening diameter: | 200 mm |
| Dimensions (W × D × H): | 1033 × 413 × 954 mm |
| Weight: | 70 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.