Decentralised heat recovery ventilation unit IVAR.ECOCOMFORT PLUS 160 with IR remote control – SALE
Code: IVAP19993Product detailed description
The IVAR.ECOCOMFORT PLUS 160 (code IVAP19993) provides continuous air exchange in a single room without opening windows and helps prevent damp and mould. In extract mode it stores the heat of the air in a ceramic regenerative exchanger, which then warms the fresh air in supply mode – recovering up to 90 % of the heat. It is intended for rooms up to 36 m².
Performance and operation
- airflow 15 m³/h in night mode, 28 / 33 / 50 m³/h at speeds 1–3, boost 55 m³/h
- power consumption 1.6 to 9 W, sound level 26 to 36 dB(A) at speeds 1–3
- microprocessor-controlled DC fan with brushless motor, ISO Coarse (G3) filter
- supply 110–230 V, 50/60 Hz, protection rating IPX4, operation at -20 °C to +50 °C
Sensors and control
Built-in sensors for temperature, air quality (VOC), humidity and light enable automatic operation in which the unit selects the appropriate mode itself. The 12-button infrared remote switches speeds, night mode and a temporary 60-minute supply or extract; one remote can also control several units. LEDs on the underside of the unit indicate its status. The remote needs two AAA batteries, which are not supplied. The unit also has Wi-Fi 2.4 GHz and Bluetooth 5.0 with firmware updates via the app.
Installation and accessories
The unit is installed in an external wall. The telescopic PVC duct with a minimum length of 24 cm adapts to the wall thickness, and the folding outdoor grille can be fitted from inside without scaffolding. The housing is made of UV-resistant, antistatic ABS plastic. The electrical connection must be made by a qualified person. Available accessories include the IVAP19978 replacement filter, the IVAP1612 rain louvre and the IVAP19880 silencer.
Technical data
| Code | IVAP19993 |
| Brand | IVAR |
| Type | IVAR.ECOCOMFORT PLUS 160 |
| Duct diameter | 160 mm |
| Airflow | 15–55 m³/h |
| Heat recovery efficiency | up to 90 % |
| Heat exchanger | ceramic regenerative |
| Power consumption | 1.6–9 W |
| Sound level (speed 1–3) | 26–36 dB(A) |
| Power supply | 110–230 V, 50/60 Hz |
| Protection rating | IPX4 |
| Operating temperature | -20 °C to +50 °C |
| Filter | ISO Coarse (G3) |
| Control | IR remote control |
| Room area | up to 36 m² |
Frequently asked questions
How large a room can the unit ventilate?
The single-room ventilation is designed for rooms up to 36 m². Airflow is 15 to 55 m³/h depending on the selected speed.
How thick can the wall be?
The telescopic duct adapts to the external wall thickness; its minimum length is 24 cm. The outdoor grille can also be fitted from inside without scaffolding.
Are batteries for the remote included?
No, the remote needs two AAA batteries, which are not supplied. According to the manufacturer they last more than 24 months.
Additional parameters
| Category: | Decentralized ventilation units and accessories |
|---|---|
| Warranty: | 2 years |
| Type: | control / sensor |
| Code: | IVAP19993 |
| Brand: | IVAR |
| Type: | IVAR.ECOCOMFORT PLUS 160 |
| Duct diameter: | 160 mm |
| Airflow: | 15–55 m³/h |
| Heat recovery efficiency: | up to 90 % |
| Heat exchanger: | ceramic regenerative |
| Power consumption: | 1.6–9 W |
| Sound level (speed 1–3): | 26–36 dB(A) |
| Power supply: | 110–230 V, 50/60 Hz |
| Protection rating: | IPX4 |
| Operating temperature: | -20 °C to +50 °C |
| Filter: | ISO Coarse (G3) |
| Control: | IR remote control |
| Room area: | up to 36 m² |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.