Ermetiq cartridge filter for water 10", 3/4", two-stage

Product detailed description

If you need to protect a 3/4" connection piping system, the two-stage cartridge filter Ermetiq with a 10" body will help. It is used for mechanical filtration of the incoming water and prevents sediments, sand and other impurities from reaching the valves, appliances or the water and heating systems. The filter works with two inserts – a washable 50 µm and a carbon 5 µm – and the package also includes a mounting bracket with a wrench.

Key Features

• connection 3/4" and body size 10"
• two filtration stages: washable insert 50 µm and carbon insert 5 µm
• maximum working pressure 10 bar
• operating temperature 5–45 °C
• mounting bracket and wrench included

Parameters

Where it can be used

The filter is intended for incoming water in household piping systems. The different fineness of the inserts (50 µm and 5 µm) allows the capture of larger and smaller particles, thus protecting batteries, valves, boilers and other appliances.

Installation and maintenance

• Secure the filter using the included mounting bracket.
• Before installation, check whether the 3/4" connection size fits your pipe.
• Closing valves before and after the filter significantly simplify maintenance.
• Observe the limits: maximum 10 bar and temperature range 5–45 °C.
• The washable 50 µm insert can be rinsed after clogging, while the carbon 5 µm insert should be replaced.

Frequently asked questions

What inserts are included in the 3/4" connection filter?

A washable insert 50 µm and a carbon insert 5 µm.

What is the maximum working pressure?

The maximum working pressure is 10 bar.

At what temperature can the filter operate?

The operating temperature is 5–45 °C.