Filter cartridge IVAR.BIG BLUE 4.5 × 20" – 40 µm, granular activated carbon – SALE
Code: ESCHV4520ECOProduct detailed description
The ESCHV4520ECO cartridge is the replacement filter element for the IVAR.BIG BLUE ESFPV4520ECO filter, size 4.5 × 20" with a 1" F connection. It contains a granular activated carbon filling with 40 µm porosity. In the IVAR.BIG BLUE range, activated carbon is the choice when, besides impurities, the taste and odour of the water also need improving.
- size 4.5 × 20", porosity 40 µm
- material: granular activated carbon filling
- for cold water at +5 to +40 °C
Cartridge life depends on the quality of the incoming water and how often the filter is used – it is usually replaced every 2 to 6 months or according to the water meter. The manufacturer recommends original cartridges only; using cartridges from other manufacturers voids the filter warranty. To replace it, close the supply, release the pressure via a tap downstream, unscrew the bowl with the wrench, clean it and check the O-ring before screwing it back on.
Technical data
| Code | ESCHV4520ECO |
| Manufacturer | IVAR |
| Type | IVAR.BIG BLUE |
| Product | filter cartridge |
| Size | 4.5 × 20" |
| Porosity | 40 µm |
| Material | granular activated carbon filling |
| Application | IVAR.BIG BLUE ESFPV4520ECO filter (1" F) |
| Water temperature | +5 to +40 °C |
| Replacement interval | usually 2–6 months |
Frequently asked questions
Which filter does the cartridge fit?
The IVAR.BIG BLUE 4.5 × 20" filter with a 1" F connection, code ESFPV4520ECO.
How often should the cartridge be replaced?
Depending on water quality, usually every 2 to 6 months. Its life depends on how contaminated the incoming water is and how often the filter is used.
How is the cartridge replaced?
Close the water supply, release the pressure via a tap downstream and unscrew the bowl with the mounting wrench. Clean the bowl and head, insert the new cartridge, seat the O-ring in its groove and screw the bowl back on by hand.
Additional parameters
| Category: | filter cartridges - FP3, BIG |
|---|---|
| Warranty: | 2 years |
| Type: | filter cartridge |
| Filter / cartridge size: | 20" |
| Code: | ESCHV4520ECO |
| Manufacturer: | IVAR |
| Type: | IVAR.BIG BLUE |
| Product: | filter cartridge |
| Size: | 4.5 × 20" |
| Porosity: | 40 µm |
| Material: | granular activated carbon filling |
| Application: | IVAR.BIG BLUE ESFPV4520ECO filter (1" F) |
| Water temperature: | +5 to +40 °C |
| Replacement interval: | usually 2–6 months |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.