Pulse water meter IVAR.IVLI DRY threaded, dry-dial – 1/2" M, Hirschmann connector
Code: 120.090.00AProduct detailed description
The IVAR.IVLI DRY, code 120.090.00A, measures water consumption and at the same time sends pulses on the current flow rate. This allows it to control proportional dosing by IVAR.DOSAMATIC PPI A and PPI X5MA pumps, to which it connects via a connecting cable of approx. 3 m with a Hirschmann connector. It is a threaded dry-dial version with MID certification and measuring range R80.
Data for the 1/2" size
- 1/2" male thread connection, DN 15
- maximum flow 3 m³/h, nominal 1.5 m³/h, minimum 30 l/h
- pressure class PN 16
- water temperature 5–40 °C, ambient 5–50 °C
- lengths per technical drawing L = 110 mm, l = 190 mm
Pulse output
The technical data sheet states 4 pulses per litre of water passed; the manufacturer's description also mentions 1 pulse per 10 litres for larger sizes. Before setting up the dosing pump, check which pulse rate your meter works with.
The IVLI DRY range is made in sizes 1/2", 3/4", 1", 5/4", 6/4" and 2". Installation into the water supply should be carried out by a plumber.
Technical data
| Code | 120.090.00A |
| Brand | IVAR |
| Type | IVAR.IVLI DRY |
| Design | threaded, dry-dial |
| Connection | 1/2" M, DN 15 |
| Max. flow | 3 m³/h |
| Nominal flow | 1.5 m³/h |
| Min. flow | 30 l/h |
| Pressure class | PN 16 |
| Water / ambient temperature | 5–40 °C / 5–50 °C |
| Certification | MID, measuring range R80 |
| Cable | approx. 3 m, Hirschmann connector |
| Length L / l | 110 / 190 mm |
Frequently asked questions
Which dosing pumps does the meter work with?
With IVAR.DOSAMATIC PPI A and PPI X5MA pumps, to which it connects via a cable with Hirschmann connector. The cable is approx. 3 m long.
How many pulses does the meter give?
The technical data sheet states 4 pulses per litre; the manufacturer's description also mentions 1 pulse per 10 litres for larger sizes. Check the value before setting up the pump.
What flow can the 1/2" meter handle?
A nominal flow of 1.5 m³/h and a maximum of 3 m³/h; the minimum flow according to the data sheet is 30 l/h.
Additional parameters
| Category: | Dosing pumps |
|---|---|
| Warranty: | 2 years |
| Type: | dosing unit / pump |
| Code: | 120.090.00A |
| Brand: | IVAR |
| Type: | IVAR.IVLI DRY |
| Design: | threaded, dry-dial |
| Connection: | 1/2" M, DN 15 |
| Max. flow: | 3 m³/h |
| Nominal flow: | 1.5 m³/h |
| Min. flow: | 30 l/h |
| Pressure class: | PN 16 |
| Water / ambient temperature: | 5–40 °C / 5–50 °C |
| Certification: | MID, measuring range R80 |
| Cable: | approx. 3 m, Hirschmann connector |
| Length L / l: | 110 / 190 mm |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.