IVAR.ANTRACITE cabinet filter for iron and manganese removal and water softening – 37 l media, Clack CI valve – SALE
Code: ESFK1235CABMIXProduct detailed description
IVAR.ANTRACITE is a high-flow cabinet filter designed for treating difficult water in the home. The 37 l of ECOMIX A ion exchange media reduces water hardness and at the same time the content of iron, manganese and organic and ammonium compounds. The filter is made in Belgium, the Clack CI control valve comes from the USA and the modern, compact cabinet fits into any interior.
Components
- preset Clack CI control valve
- pressure vessel with the media
- brine tank with safety float valve, holding up to 130 kg of salt
- cover cabinet measuring 360 × 565 × 1095 mm
The package also contains a connection kit and a mains adapter. The CLACK bypass is available as an optional accessory.
Operation
Thanks to low salt consumption (3.7 – 6.0 kg per regeneration) and the large salt tank, the filter can run for up to 7 months without topping up salt. Regeneration takes 80 – 110 minutes; at an inlet hardness of 250 mg/l CaCO3 the capacity is 4.5 m³ of treated water. The operating flow is 1.4 / 1.8 m³/h, the pressure drop in service 0.5 bar and the power consumption 30 W at 230 V, 50 Hz.
Inlet water requirements
- hardness up to 750 mg/l CaCO3, iron up to 15 mg/l, manganese up to 3 mg/l
- chemical oxygen demand up to 20 mg/l O2, ammonium ions up to 4 mg/l
- water temperature +4 to +30 °C, a 100 µm mechanical pre-filter upstream of the filter
Installation and electrical connection must be carried out by a qualified person. Both the filter and the brine tank are connected to the drain, and the tank is filled with tablet regeneration salt (recommended code 410.600.44CS).
Technical data
| Code | ESFK1235CABMIX |
| Brand | IVAR |
| Type | IVAR.ANTRACITE |
| Application | iron and manganese removal, water softening |
| Control valve | Clack CI, preset |
| Ion exchange media | ECOMIX A, 37 l |
| Inlet/outlet connection | 3/4" M |
| Drain connection | 3/4" M |
| Operating pressure | 2 – 6 bar |
| Operating flow | 1.4 / 1.8 m³/h (max. 2.5 m³/h) |
| Salt consumption | 3.7 – 6.0 kg/regeneration |
| Regeneration time | 80 – 110 min |
| Power supply | 230 V, 50 Hz, 30 W |
| Weight | 42 kg (without media) |
| Dimensions W × D × H | 360 × 565 × 1095 mm |
Frequently asked questions
How often does salt need topping up?
The tank holds up to 130 kg of salt and, with consumption of 3.7 – 6.0 kg per regeneration, lasts up to 7 months. Tablet regeneration salt is used.
What water can the filter treat?
Inlet water may have a hardness of up to 750 mg/l CaCO3, up to 15 mg/l of iron, 3 mg/l of manganese and 4 mg/l of ammonium ions at +4 to +30 °C. A 100 µm mechanical pre-filter must be fitted upstream.
What is in the package?
The softener body with pressure vessel, media and Clack CI valve, a connection kit and a mains adapter. The CLACK bypass can be added as an optional accessory.
What maintenance does the filter need?
Top up salt as it is used, check the pressure and water quality twice a year and clean the salt tank once a year. An annual service is also recommended.
Additional parameters
| Category: | softening filters |
|---|---|
| Warranty: | 2 years |
| Weight: | 42 kg |
| Type: | accessories |
| Code: | ESFK1235CABMIX |
| Brand: | IVAR |
| Type: | IVAR.ANTRACITE |
| Application: | iron and manganese removal, water softening |
| Control valve: | Clack CI, preset |
| Ion exchange media: | ECOMIX A, 37 l |
| Inlet/outlet connection: | 3/4" M |
| Drain connection: | 3/4" M |
| Operating pressure: | 2 – 6 bar |
| Operating flow: | 1.4 / 1.8 m³/h (max. 2.5 m³/h) |
| Salt consumption: | 3.7 – 6.0 kg/regeneration |
| Regeneration time: | 80 – 110 min |
| Power supply: | 230 V, 50 Hz, 30 W |
| Weight: | 42 kg (without media) |
| Dimensions W × D × H: | 360 × 565 × 1095 mm |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.